r87mm
Member

221 Likes

Page 7 of 15 First 123456789101112131415 Last

• Jump to page:

1. 
   Micky Duck liked post by r87mm On thread : Load Development - Velocity vs Accuracy

   If first shot always goes to point of aim and second shot very close everytime then no problem. You aren't shooting groups into animals! Second shot needs to be close as to make a hit if you stuff up...

   Liked On: 06-02-2021, 09:57 AM

2. 
   Trout liked post by r87mm On thread : Vortex update

   After taking the advice and address sent to me by another member, I contacted a person at Vortex. He was polite and helpful and wanting to resolve my issue. I explained my experience with Retravision...

   Liked On: 19-12-2020, 11:46 AM

3. 
   Tim Dicko liked post by r87mm On thread : Any one seating bullets using a graphite powder?

   I do. Just dip the base of the projectile into the lube and then seat it. Graphite changes with humidity. When it's very dry it doesn't stick to the projectiles very well but when humidity is high...

   Liked On: 15-12-2020, 08:51 PM

4. 
   Kimber 7mm-08 liked post by r87mm On thread : Vortex update

   After taking the advice and address sent to me by another member, I contacted a person at Vortex. He was polite and helpful and wanting to resolve my issue. I explained my experience with Retravision...

   Liked On: 15-12-2020, 12:17 AM

5. 
   takbok liked post by r87mm On thread : Vortex update

   After taking the advice and address sent to me by another member, I contacted a person at Vortex. He was polite and helpful and wanting to resolve my issue. I explained my experience with Retravision...

   Liked On: 14-12-2020, 10:57 PM

6. 
   charliehorse liked post by r87mm On thread : Vortex update

   After taking the advice and address sent to me by another member, I contacted a person at Vortex. He was polite and helpful and wanting to resolve my issue. I explained my experience with Retravision...

   Liked On: 14-12-2020, 09:39 PM

7. 
   Moa Hunter liked post by r87mm On thread : Vortex update

   After taking the advice and address sent to me by another member, I contacted a person at Vortex. He was polite and helpful and wanting to resolve my issue. I explained my experience with Retravision...

   Liked On: 14-12-2020, 08:37 PM

8. 
   Marty Henry liked post by r87mm On thread : Vortex update

   After taking the advice and address sent to me by another member, I contacted a person at Vortex. He was polite and helpful and wanting to resolve my issue. I explained my experience with Retravision...

   Liked On: 14-12-2020, 08:01 PM

9. 
   Micky Duck liked post by r87mm On thread : Vortex update

   After taking the advice and address sent to me by another member, I contacted a person at Vortex. He was polite and helpful and wanting to resolve my issue. I explained my experience with Retravision...

   Liked On: 14-12-2020, 07:59 PM

10. 
    Cordite liked post by r87mm On thread : Lathe

    Have talked to a local gunsmith and he's going to look at the gear for me and see what can be done. Probably get him to cut the acme threads on the screw brass nuts as well since they are pretty worn...

    Liked On: 14-11-2020, 04:22 PM

11. 
    mimms2 liked post by r87mm On thread : Lathe

    Have talked to a local gunsmith and he's going to look at the gear for me and see what can be done. Probably get him to cut the acme threads on the screw brass nuts as well since they are pretty worn...

    Liked On: 14-11-2020, 03:59 PM

12. 
    mark kiwi liked post by r87mm On thread : Kiwiana Gongs!

    Ar400 min ,ar500 better. Used cutting edges off loaders and earth moving equipment including digger teeth work well. Other than teeth we often used old edges for wear areas on other plant so often...

    Liked On: 03-10-2020, 12:43 PM

13. 
    Pengy liked post by r87mm On thread : Indoor range

    He's in a building with a range built into it as part of the build so a bit different. This person has already had history with the neighbor and has court ruled conditions to stick to. It's not so...

    Liked On: 18-09-2020, 07:59 PM

14. 
    Pengy liked post by r87mm On thread : Indoor range

    Talked to owner more and got more info. Council got involved and ended in a court ruling of 55 decibels but not sure where measurements are/ were taken from. Anyway using a modified container with...

    Liked On: 17-09-2020, 09:58 PM

15. 
    berg243 liked post by r87mm On thread : Indoor range

    Talked to owner more and got more info. Council got involved and ended in a court ruling of 55 decibels but not sure where measurements are/ were taken from. Anyway using a modified container with...

    Liked On: 17-09-2020, 11:32 AM

Page 7 of 15 First 123456789101112131415 Last

• Jump to page: