r87mm
Member

221 Likes

Page 9 of 15 First 123456789101112131415 Last

• Jump to page:

1. 
   rossi.45 liked post by r87mm On thread : 7mm RM rechambering

   Talk to Kiwi Greg. As above 180 eld or berger 180. 7mag 2900-3000ish give or take. Your barrel twist is boarder line and will show at distance more than close. Just because it's stable at 1000...

   Liked On: 13-01-2020, 07:06 PM

2. 
   Mathias liked post by r87mm On thread : Mathias/wilberforce

   Over seas owner isn't the problem.He believes in keeping access for people. Knew someone who worked there until recently. Managers wife is apparently a piece of work. High staff turn over and even...

   Liked On: 14-12-2019, 05:33 PM

3. 
   Strummer liked post by r87mm On thread : Mathias/wilberforce

   Over seas owner isn't the problem.He believes in keeping access for people. Knew someone who worked there until recently. Managers wife is apparently a piece of work. High staff turn over and even...

   Liked On: 14-12-2019, 02:32 PM

4. 
   ChrisW liked post by r87mm On thread : 7mm mag and 180gr ELDM

   I've got some 7rem brass somewhere and some 180eld's and should have my load specs. I'll throw a dummy one together and give you a coal when I get home The powder did rattle so I knew I had plenty...

   Liked On: 27-08-2019, 06:20 PM

5. 
   ChrisW liked post by r87mm On thread : 7mm mag and 180gr ELDM

   Don't have coal. I load using a comparator so i was 10 thou off the lands based on ogive. It was in a blaser which have a long mag and action as they accommodate bigger cartridges. 30 inch barrel...

   Liked On: 27-08-2019, 05:03 PM

6. 
   ChrisW liked post by r87mm On thread : 7mm mag and 180gr ELDM

   I had 2850fps from a 7mm rem mag. I didn't try for more speed but feel I was getting close. 2225,215fed, norma cases. Rifle had a long mag so could seat out with no compression. Was floating around...

   Liked On: 27-08-2019, 02:33 PM

7. 
   dannyb liked post by r87mm On thread : Muzzle Breaks

   You can as long as there's enough meat in the barrel to be able to thread it to the one that's in the break. Watch out for larger threads like 5/8x24 and bigger if you have a light contour barrel

   Liked On: 26-08-2019, 09:49 AM

8. 
   rewa liked post by r87mm On thread : Newby reloading question. Tight bolt cases

   Neck sized cases usually close with a Little resistance as pretty much what Marty Henry said. I have been sizing loaded 223 rounds with a modified die as the shoulder needs to be pushed back about...

   Liked On: 29-07-2019, 08:52 PM

9. 
   ishoot10s liked post by r87mm On thread : Blaser barrels

   This is a quote from Elmer Laitala. He makes and hardens complete barrels in various calibers and twists that you can't get from blaser as well as standard calibers. Barring freight and import costs...

   Liked On: 24-07-2019, 06:41 PM

10. 
    ishoot10s liked post by r87mm On thread : Blaser barrels

    Here's his answer on stainless barrels, Concerning your question on SS barrels, four years ago I started out making these barrels out of 416 SS but found out that it looses A LOT of impact...

    Liked On: 24-07-2019, 06:40 PM

11. 
    kiwijames liked post by r87mm On thread : Blaser barrels

    This is a quote from Elmer Laitala. He makes and hardens complete barrels in various calibers and twists that you can't get from blaser as well as standard calibers. Barring freight and import costs...

    Liked On: 24-07-2019, 07:58 AM

12. 
    kiwijames liked post by r87mm On thread : Blaser barrels

    Here's his answer on stainless barrels, Concerning your question on SS barrels, four years ago I started out making these barrels out of 416 SS but found out that it looses A LOT of impact...

    Liked On: 24-07-2019, 07:58 AM

13. 
    mudgripz liked post by r87mm On thread : All things Maxtoch..

    Rugerman could be closer to the truth than you think. I worked with an ex copper many years ago when they had the big mag lights. He and his mates loved them in the force. To produce their battens...

    Liked On: 15-06-2019, 10:49 PM

14. 
    Moa Hunter liked post by r87mm On thread : 270WSM 130g sst vs the 145 eldx ?

    I used to use the 130sst and 130 ab. Both performed ok out to around 400. Didn't get many pass throughs though so changed to 150sst's. Large holes appeared in the off side of deer and they never...

    Liked On: 26-05-2019, 09:03 PM

15. 
    dannyb liked post by r87mm On thread : 270WSM 130g sst vs the 145 eldx ?

    I used to use the 130sst and 130 ab. Both performed ok out to around 400. Didn't get many pass throughs though so changed to 150sst's. Large holes appeared in the off side of deer and they never...

    Liked On: 26-05-2019, 06:57 PM

Page 9 of 15 First 123456789101112131415 Last

• Jump to page: