Where i shoot mostly local farm I have a sturdy table that lives there made from 4x2 6x2 and 18mm ply top Just wheel my chair under and shoot normally ether sand bags bipod or lead sled if doing...
Liked On: 24-02-2019, 06:04 AM
Check that the recoil lug is seated in the stock properly Im sure they are removable on tikka’s if it’s not seated properly down into its Recess it could be your issue also
Liked On: 11-02-2019, 04:19 PM
I have a hushpro works mint I think using subsonic you would need equipment to really notice the difference between a $20 one and a $200 One if you use supersonic or 22mag/hmr that’s when the...
Liked On: 10-02-2019, 08:27 PM
You don’t really need a manual although it’s handy to have one but not essential As all the information is available for free online For example you get a can of ar2208 for your 7mm-08 308etc...
Liked On: 03-02-2019, 05:41 PM
I hear you has a Definite ring that matches the one on the brass Just cleaned a bunch of brass off the bolt face aswell 104013 The rifle is only 140 rounds old so I’ll take it back next week...
Liked On: 01-02-2019, 04:28 PM
superdiver have just finished a 120nbt load for quad hunters 260 21 inch tfum barrel Lapua brass Ar2208 a fair way over max so won’t post details in case of an Idiot reading and deciding its a good...
Liked On: 30-01-2019, 09:56 PM
101943 101944 Muz @quadhunters hunting set up Something like that retrofitted to his chair might work
Liked On: 24-01-2019, 07:44 AM
101943 101944 Muz @quadhunters hunting set up Something like that retrofitted to his chair might work
Liked On: 23-01-2019, 09:18 PM
Yep can do all though if the screw rips out of a tight fitting ball before you get it out you are really stuffed then lol What I normally do if i dryball (ram a ball forgetting to put powder down...
Liked On: 22-01-2019, 07:36 AM
Yeah mate get a vld seating stem and it will go away I had this issue with my creedmoor with vlds and eldx vld stem fixed all issues
Liked On: 20-01-2019, 06:40 PM
You can trim a spring in the trigger to lighten it Or you can replace it with a lighter spring My Grendel i did myself just trimmed the spring a little The creedmoor I had the gunsmith do but...
Liked On: 18-01-2019, 08:59 PM
I have a howa 1500 2 actually one in 6.5 creedmoor and one mini action on Grendel (for sale) Both are sub half moa guns Both have had trigger jobs and are awesome triggers The creedmoor is a...
Liked On: 18-01-2019, 11:44 AM
I have a howa 1500 2 actually one in 6.5 creedmoor and one mini action on Grendel (for sale) Both are sub half moa guns Both have had trigger jobs and are awesome triggers The creedmoor is a...
Liked On: 17-01-2019, 08:43 PM
I agree tikka and howa are on par quality/accuracy wise but howas are cheaper the tikka is a entry plus Rifle at a high end price tbh I think they are way overpriced for what they are... and the...
Liked On: 17-01-2019, 06:16 PM
I have a howa 1500 2 actually one in 6.5 creedmoor and one mini action on Grendel (for sale) Both are sub half moa guns Both have had trigger jobs and are awesome triggers The creedmoor is a...
Liked On: 17-01-2019, 05:20 PM