Rated M for Magnum
Member

358 Likes

Page 4 of 24 First 123456789101112131415161718 ... Last

• Jump to page:

1. 
   John Duxbury liked post by Rated M for Magnum On thread : AR2208 for .243 ?

   I know I was surprised as well. I did up a ladder and just kept going up until I got pressure then came back half a grain. Turns out it shot really well too, happy days.

   Liked On: 31-08-2024, 11:02 PM

2. 
   Calvnz1 liked post by Rated M for Magnum On thread : AR2208 for .243 ?

   2208 is the business in 243. I used it with 105 grain Targex pills to get 2950fps out of a 20 inch barrel. This was a Truflite barrel that was pretty fast. Nice and accurate too, had it clover...

   Liked On: 31-08-2024, 06:07 PM

3. 
   GSP HUNTER liked post by Rated M for Magnum On thread : Reloading for 270 Win

   +1 on the W760, very cheap from Belmont in Wanganui. Load for my mate's 270 and it goes good with 130 grain hornady interlocks, yet to try any other projectiles in it.117402k That's 3 shots at...

   Liked On: 20-08-2024, 02:59 PM

4. 
   Grantn liked post by Rated M for Magnum On thread : I have returned to a differnt world.

   50, hmm better make that 100, can't be too sure.

   Liked On: 09-08-2024, 08:05 PM

5. 
   Micky Duck liked post by Rated M for Magnum On thread : Primer seating problems

   If you are priming on a press (even on some hand primers) using shell holders to hold shells, not all shell holders are created equal.

   Liked On: 29-07-2024, 02:57 PM

6. 
   30.06king liked post by Rated M for Magnum On thread : What Have You Loaded Today

   Not today, last night. Got a handful of 165 grain btsp interlocks off a mate, loaded them to same overall length as factory stuff that shoots really well in my wsm. Test them out tomorrow. ...

   Liked On: 20-07-2024, 01:44 PM

7. 
   whanahuia liked post by Rated M for Magnum On thread : Found this very interesting.

   Very educational, I like that he actually went out and tested the theory too. That horizontal stringing is typical of a fouled barrel that needs cleaning. My howa 308 used to do it if I didn't...

   Liked On: 20-07-2024, 01:09 PM

8. 
   7mm Rem Mag liked post by Rated M for Magnum On thread : What Have You Loaded Today

   Not today, last night. Got a handful of 165 grain btsp interlocks off a mate, loaded them to same overall length as factory stuff that shoots really well in my wsm. Test them out tomorrow. ...

   Liked On: 20-07-2024, 01:03 PM

9. 
   Borris liked post by Rated M for Magnum On thread : What Have You Loaded Today

   Not today, last night. Got a handful of 165 grain btsp interlocks off a mate, loaded them to same overall length as factory stuff that shoots really well in my wsm. Test them out tomorrow. ...

   Liked On: 20-07-2024, 12:40 PM

10. 
    Jukes liked post by Rated M for Magnum On thread : Seating Depth Test. Waste of Time?

    I think that a seating depth test is pointless if you already had the best seating depth to start with. This is 4 shots at the start of a seating depth test after I had decided on a charge weight....

    Liked On: 18-07-2024, 09:58 AM

11. 
    Roarless20 liked post by Rated M for Magnum On thread : Seating Depth Test. Waste of Time?

    I think that a seating depth test is pointless if you already had the best seating depth to start with. This is 4 shots at the start of a seating depth test after I had decided on a charge weight....

    Liked On: 17-07-2024, 02:34 PM

12. 
    7mm Rem Mag liked post by Rated M for Magnum On thread : Seating Depth Test. Waste of Time?

    I think that a seating depth test is pointless if you already had the best seating depth to start with. This is 4 shots at the start of a seating depth test after I had decided on a charge weight....

    Liked On: 16-07-2024, 09:08 AM

13. 
    Jaco Goosen liked post by Rated M for Magnum On thread : Tight chamber and marks on projectile

    Autosol on a patch wrapped around a worn brush back and forth at the chamber end will get the carbon ring gone. Ideally you check it with a bore scope/endoscope, cheap as chips off the internet, $50...

    Liked On: 10-07-2024, 01:15 PM

14. 
    onlyhsh liked post by Rated M for Magnum On thread : Tight chamber and marks on projectile

    Autosol on a patch wrapped around a worn brush back and forth at the chamber end will get the carbon ring gone. Ideally you check it with a bore scope/endoscope, cheap as chips off the internet, $50...

    Liked On: 10-07-2024, 09:42 AM

15. 
    TroyMclean liked post by Rated M for Magnum On thread : 270 Precision Hunter slower than Grandma’s vitz?

    I put your info from above onto strelok and it gives the same result, it just drops like a stone (a really pointy, deathly one) after about 330 yards. Have you got your distances in the same...

    Liked On: 26-06-2024, 12:30 PM

Page 4 of 24 First 123456789101112131415161718 ... Last

• Jump to page: