Rated M for Magnum
Member

358 Likes

Page 1 of 24 123456789101112131415 ... Last

• Jump to page:

1. 
   Micky Duck liked post by Rated M for Magnum On thread : Maker Mucking About

   Get in touch with the supplier you got them from. If anything they will want to know about the problem.

   Liked On: 29-04-2025, 09:04 PM

2. 
   stagstalker liked post by Rated M for Magnum On thread : Franchi Affinity 3

   Hey team, went into my local yesterday and picked a few up and got a feel for them. They had an Affinity, Beretta A300 and a Benelli m2. Ended up taking home the Affinity as it fitted me the...

   Liked On: 28-04-2025, 10:36 PM

3. 
   25/08 IMP liked post by Rated M for Magnum On thread : 7mm rem mag loads

   2217 was my favorite for the 7mm rem mag by far. Best in speed, sd and accuracy with 160 to 175 grain bullets. Federal brass, cci 250 or federal 215 primers, 2217 and 160 TMK, 162 ELDM, ELD-X 175...

   Liked On: 14-04-2025, 09:06 PM

4. 
   H.M liked post by Rated M for Magnum On thread : DPT muzzle break end cap results.

   I put one on my 300wsm and with a 24 inch barrel I didn't notice a difference. Shortened that rifle to 20 inches and tried the break, what a difference! It's nicer to shoot now than at 24 inches.

   Liked On: 07-04-2025, 08:24 PM

5. 
   Rock river arms hunter liked post by Rated M for Magnum On thread : Super bush pig

   Already said above but don't go short on a 6.5 PRC. I went to 20 inches with mine and the factory Norma ammo was doing 2520fps. I reload for it now and am somewhere around 3000fps with the 143...

   Liked On: 24-03-2025, 07:52 PM

6. 
   SPEARONZ liked post by Rated M for Magnum On thread : Super bush pig

   Already said above but don't go short on a 6.5 PRC. I went to 20 inches with mine and the factory Norma ammo was doing 2520fps. I reload for it now and am somewhere around 3000fps with the 143...

   Liked On: 24-03-2025, 06:26 PM

7. 
   TimC liked post by Rated M for Magnum On thread : Super bush pig

   Already said above but don't go short on a 6.5 PRC. I went to 20 inches with mine and the factory Norma ammo was doing 2520fps. I reload for it now and am somewhere around 3000fps with the 143...

   Liked On: 24-03-2025, 06:08 PM

8. 
   Gkp liked post by Rated M for Magnum On thread : Super bush pig

   Already said above but don't go short on a 6.5 PRC. I went to 20 inches with mine and the factory Norma ammo was doing 2520fps. I reload for it now and am somewhere around 3000fps with the 143...

   Liked On: 24-03-2025, 05:55 PM

9. 
   6x47 liked post by Rated M for Magnum On thread : Jump tolerance of 7mm 160 ELD-Xs?

   162 ELD-X handle plenty of jump no problems. I had a Sako A7 7mm rem mag and loaded to mag length, no issues with about 150 thou of jump.

   Liked On: 18-03-2025, 07:26 AM

10. 
    mikee liked post by Rated M for Magnum On thread : .308 reloading starting point

    It depends on your mindset and why you want to reload. I'm in a similar mindset to you, I like shooting and it makes shooting way cheaper to do than buying box ammo (especially of you're shooting a...

    Liked On: 26-02-2025, 08:45 PM

11. 
    Andrew46826 liked post by Rated M for Magnum On thread : .308 reloading starting point

    It depends on your mindset and why you want to reload. I'm in a similar mindset to you, I like shooting and it makes shooting way cheaper to do than buying box ammo (especially of you're shooting a...

    Liked On: 26-02-2025, 06:58 PM

12. 
    csmiffy liked post by Rated M for Magnum On thread : Bullet Choice on Hares

    This was about 6 to 12 months ago.

    Liked On: 20-01-2025, 12:38 PM

13. 
    ANTSMAN liked post by Rated M for Magnum On thread : loading 243 soon

    2208 (in-between the two) went well in 20 inch barrel with 90s 95s and 105s. 3150 fps 40grains of it with 95 nolser ballistic tips. You won't go wrong with 2209 but any bulkier and you won't get...

    Liked On: 19-01-2025, 06:57 AM

14. 
    308 liked post by Rated M for Magnum On thread : Securing a pistol safe, wooden house vs concrete floor garage

    All tidy now, just waiting on interviews and inspection. Two long pieces of 100mmx100mm angle iron secured to the joists and bolted with nylock nuts and lock nuts, excess thread of bolt bent over to...

    Liked On: 10-01-2025, 11:36 PM

15. 
    6x47 liked post by Rated M for Magnum On thread : New 7mm offering by federal

    7 FOSM - Federal OverSaturated Market Member Or FUCM - Federal Ultra Complicated Magnum Something with a multi piece, multi alloy case and sabot projectiles.

    Liked On: 30-12-2024, 07:26 PM

Page 1 of 24 123456789101112131415 ... Last

• Jump to page: