Roarless20
Member

414 Likes

Page 20 of 28 First ... 678910111213141516171819202122232425262728 Last

• Jump to page:

1. 
   mikee liked post by Roarless20 On thread : Fill length resizing not using expander button.

   If you read that linked article properly you will see that the Shooter has custom reamed dies that act like a bushing die, which sizes the neck o.d. spot on. He also lubes the inside case neck just...

   Liked On: 28-09-2022, 07:37 AM

2. 
   Micky Duck liked post by Roarless20 On thread : Fill length resizing not using expander button.

   I pulled some .260rem ammo a dude loaded without the expander button on with rcbs FL dies. 30 hits with the inertia hammer to get them out! I broke the hammer and had to borrow a camlock puller which...

   Liked On: 27-09-2022, 06:58 PM

3. 
   7mm Rem Mag liked post by Roarless20 On thread : Fill length resizing not using expander button.

   I pulled some .260rem ammo a dude loaded without the expander button on with rcbs FL dies. 30 hits with the inertia hammer to get them out! I broke the hammer and had to borrow a camlock puller which...

   Liked On: 26-09-2022, 02:02 PM

4. 
   Young_sika_hntr liked post by Roarless20 On thread : Sika Roar 2022 youtube vid

   Awesome footage. I shot a smaller 8pt sika last year in the roar. He was just as fat as yours. Western Kaimanawas.

   Liked On: 08-06-2022, 07:33 PM

5. 
   Tuckerbox liked post by Roarless20 On thread : Magnetospeed off barrel mount Version 1

   That looks like it'll work :thumbsup: I started an attempt at the same sort of project a few months ago. It was a poor attempt in a day and I gave up on it after butchering my Sporter bayonet...

   Liked On: 06-06-2022, 06:54 PM

6. 
   Micky Duck liked post by Roarless20 On thread : First time sika

   Great first sika hunt. I bumbled around this year without finding an 8. My old man carries his vixen .222 everywhere we hunt. When I eventually get that rifle I'll probably carry it everywhere too.

   Liked On: 15-05-2022, 07:21 PM

7. 
   Nathan F liked post by Roarless20 On thread : Ammo Availability?

   Falcon 2 3/4" 35g #4 is my go to

   Liked On: 02-05-2022, 08:23 AM

8. 
   caberslash liked post by Roarless20 On thread : Match vs hunting bullets

   This guy is a fanatic but you can glean some good info out of his vids https://www.youtube.com/watch?v=7VztT0CXc5g&ab_channel=LongrangehuntingGroup TMKs are probably the same as ELDM/X and TGKs...

   Liked On: 30-03-2022, 09:26 PM

9. 
   Tahr liked post by Roarless20 On thread : 115 gr Gold Dot in 270

   I watched that clip this morning before you posted. It popped up on my phone yesterday while up on the hill. Bloody impressed with how they retained their weight after expanding so much at such a...

   Liked On: 30-03-2022, 02:13 PM

10. 
    Moa Hunter liked post by Roarless20 On thread : Reasons to be wary of Others reloads

    I bought an older second hand Remington Model Seven .260. It came with two types of reloads 'Good' & 'Goat Shooting' and once fired cases. These reloads that the previous owner said were 'Goat...

    Liked On: 19-03-2022, 08:42 AM

11. 
    40mm liked post by Roarless20 On thread : Reasons to be wary of Others reloads

    I'll try this when i get another bullet puller. Hopefully a local has a collet puller.

    Liked On: 18-03-2022, 10:00 PM

12. 
    stagstalker liked post by Roarless20 On thread : Case length 7mm saum vs 7mm08

    Lee case length guages aren't over accurate with their spec anyway. I had 3 .243 guages that were 15thou different in length. I just used the closest to spec and shortened the shortest for the 6mmCM.

    Liked On: 13-03-2022, 10:47 AM

13. 
    stagstalker liked post by Roarless20 On thread : Case length 7mm saum vs 7mm08

    Could be the Chambering or Max cartridge length instead of recommended trim length.

    Liked On: 13-03-2022, 10:47 AM

14. 
    stagstalker liked post by Roarless20 On thread : Case length 7mm saum vs 7mm08

    I use a .260 Lee case length Guage for my 6.5prc with a magnum shell holder. I tested a case and measured first before doing all cases. Also I use a .243 Guage shortened down for my 6mm Creedmoor....

    Liked On: 13-03-2022, 10:47 AM

15. 
    Micky Duck liked post by Roarless20 On thread : Case length 7mm saum vs 7mm08

    Lee case length guages aren't over accurate with their spec anyway. I had 3 .243 guages that were 15thou different in length. I just used the closest to spec and shortened the shortest for the 6mmCM.

    Liked On: 12-03-2022, 10:27 PM

Page 20 of 28 First ... 678910111213141516171819202122232425262728 Last

• Jump to page: