Robojaz
Member

198 Likes

Page 2 of 14 First 1234567891011121314 Last

• Jump to page:

1. 
   Moa Hunter liked post by Robojaz On thread : stiffy

   Have a Rem 700 SPS Tactical in 223 that came with a hogue stock which was quite flexible. I used the terminal ballistics product to bed the action and stabilise the forend. To save weight and...

   Liked On: 11-05-2021, 10:43 PM

2. 
   310cadet liked post by Robojaz On thread : Garmin Rino 650 USB Charging

   I have a Garmin Rino 650 that I have been using for a few years. I bought a AA battery pack for it to use on longer trips but quickly became sick of the larger size and inability to transmit at 5...

   Liked On: 08-04-2021, 12:12 PM

3. 
   Puffin liked post by Robojaz On thread : Osprey packs

   Tentman equipment list of gear in my photos. Sleep system is Sea to Summit sleeping bag, if I am going to in colder climates I add a Sea to Summit Reactor liner, but it would have to be above...

   Liked On: 10-02-2021, 08:10 AM

4. 
   veitnamcam liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

   Yeah, I had been thinking about doing it for a while, but the project as a whole seemed quite daunting. The hard part was finding out how to do it. There was very little out there about how to...

   Liked On: 26-01-2021, 08:14 PM

5. 
   veitnamcam liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

   A while back I purchased a second hand Savage Model 110 chambered in 30-06. It was and is a perfectly functional rifle and after a bit of load development manged to get shooting well with a diet of...

   Liked On: 24-01-2021, 07:09 PM

6. 
   robhughes-games liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

   No, did not get any shrinking.

   Liked On: 24-01-2021, 04:13 PM

7. 
   hotsoup liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

   FIRST GO AT A FIBERGLASS STOCK With the mold complete it was now time to bite the bullet and have a go at making my first rifle stock. As I previously mentioned I had decided that I would make my...

   Liked On: 22-01-2021, 12:06 PM

8. 
   hotsoup liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

   MAKING THE MOLD Up until this stage I was fairly comfortable with what I had to do and how to proceed, from here I was in unfamiliar territory. Consequently, I sought advice and received some very...

   Liked On: 22-01-2021, 12:05 PM

9. 
   bunji liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

   Hey all, I am still planning to go ahead and make a carbon fiber stock, but unfortunately I got stuck half way through moving house with COVID-19, so all my tools etc.. have been packed away....

   Liked On: 19-01-2021, 11:44 PM

10. 
    bunji liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

    FIRST GO AT A FIBERGLASS STOCK With the mold complete it was now time to bite the bullet and have a go at making my first rifle stock. As I previously mentioned I had decided that I would make my...

    Liked On: 19-01-2021, 11:39 PM

11. 
    bunji liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

    MAKING THE MOLD Up until this stage I was fairly comfortable with what I had to do and how to proceed, from here I was in unfamiliar territory. Consequently, I sought advice and received some very...

    Liked On: 19-01-2021, 11:37 PM

12. 
    bunji liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

    FIRST STAGE CARVE THE PLUG Now having only the one stock for a Savage rifle and no easy way to get a replacement if I destroyed it in the process, I made the decision to make a new rifle stock...

    Liked On: 19-01-2021, 11:27 PM

13. 
    bunji liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

    131416

    Liked On: 19-01-2021, 11:26 PM

14. 
    6x47 liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

    MAKING THE MOLD Up until this stage I was fairly comfortable with what I had to do and how to proceed, from here I was in unfamiliar territory. Consequently, I sought advice and received some very...

    Liked On: 28-10-2020, 12:27 PM

15. 
    Woody liked post by Robojaz On thread : DIY Carbon Fiber Rifle Stock

    Hey all, I am still planning to go ahead and make a carbon fiber stock, but unfortunately I got stuck half way through moving house with COVID-19, so all my tools etc.. have been packed away....

    Liked On: 28-10-2020, 09:09 AM

Page 2 of 14 First 1234567891011121314 Last

• Jump to page: