RugerM77
Member

393 Likes

Page 23 of 27 First ... 9101112131415161718192021222324252627 Last

• Jump to page:

1. 
   RugerM77 liked post by bunji On thread : Up the river

   So today was the last day for my Lill Bro at the Bach & he heads back to reality in the morning ,so l gave him the option ,as he is a keen & pretty good Diver, we could take my Dive boat out wide &...

   Liked On: 24-01-2022, 02:59 PM

2. 
   RugerM77 liked post by Berosus On thread : Bergara BA 13 20"

   Found the same thing with my 16.5" version. Those 150grn gameheads have been equal to my best efforts at reloading so far!

   Liked On: 02-12-2021, 02:17 PM

3. 
   RugerM77 liked post by Kudu On thread : Nosler Performance

   Hi. Well this thread could actually go in a few different pages, but I thought I'd put it here. Last week I headed bush to find a deer... I found one.. And the video is below. ...

   Liked On: 01-12-2021, 11:17 AM

4. 
   RugerM77 liked post by shooternz On thread : Cartridge suggestions

   Take a look at the 7x64 / 280 Rem 30/06 like the .308 case based cartridges on steroids with out the recoil , My pick would be the 7x64 with Norma ammo if factory is what you will be shooting most.

   Liked On: 29-11-2021, 02:24 PM

5. 
   RugerM77 liked post by zimmer On thread : Playing with some Redding Competition Shell Holders

   Here's a chart to help understand Redding Competition Shell Holders and what effect they have. This is my set measured using a Mitutoyo depth micrometer so reasonably accurate. I measured at three...

   Liked On: 14-11-2021, 03:51 PM

6. 
   RugerM77 liked post by zimmer On thread : Trying something, Eric Cortina method of load development

   I have used all sorts of methods - split case necks and close on long seated bullet, Stoney Point (now Hornady OAL gauge) method, Sinclairs tool for measuring seating depth (lies in cupboard unused),...

   Liked On: 13-11-2021, 06:50 PM

7. 
   RugerM77 liked post by Puffin On thread : Trying something, Eric Cortina method of load development

   Just a note on the above, #69: threaded "modified" cases are for the OAL gauge, a measurement that M. Cortina is at pains to emphasize is not required for his method. The stock photo I posted is...

   Liked On: 13-11-2021, 08:45 AM

8. 
   RugerM77 liked post by dannyb On thread : Trying something, Eric Cortina method of load development

   You raise a valid point, I should be very clear I am no Olympic marksman this is true, but I can shoot and at 100 yards I'm confident in knowing if I have pulled a shot or not. Your also correct 3...

   Liked On: 10-11-2021, 12:18 PM

9. 
   RugerM77 liked post by grandpamac On thread : Taupo range

   Greetings All, Agree with the last few posts. Marksmanship is only developed through practice. I used to be a reasonable shot in our club competitions and even had my name engraved on a few...

   Liked On: 18-10-2021, 10:08 AM

10. 
    RugerM77 liked post by Micky Duck On thread : When men were men

    well it seems these fellas are a bit shy.... I will add short tale concerning a member on here.... we were away on hunting trip way down south.... the 3 of us had roared up 1 antlered stag,then...

    Liked On: 14-10-2021, 08:51 PM

11. 
    RugerM77 liked post by Blackfern On thread : Recipe for Howa 1500 .308

    Just to throw another idea in the mix. I'm using Sako factory 123 grn in my howa 308 and get 10mm c t c groups at 100mtrs.

    Liked On: 13-10-2021, 01:24 PM

12. 
    RugerM77 liked post by The bomb On thread : Recipe for Howa 1500 .308

    Sako A7 , 16 in barrel. 43g 2206h and any 150g pill except Barnes,all shoot under inch @ 100 m ,just slightly different point of impacts.

    Liked On: 13-10-2021, 10:07 AM

13. 
    RugerM77 liked post by dogmatix On thread : Recipe for Howa 1500 .308

    In my Howa Bravo .308 I'm shooting Hornady 155gn HPBT with 44.5gn of 2206h, Fed Match primers and Lapua brass. Also Hornady 168gn ELD-M with 42.5gn 2206H. Same primers and brass. Still playing...

    Liked On: 13-10-2021, 10:07 AM

14. 
    RugerM77 liked post by 257weatherby On thread : Recipe for Howa 1500 .308

    Currently at 45.5 2206h pushing a 165 Targex and 47gn 2206h pushing a 150 Speer Hotcor. I don't reckon you can get enough stick powder in the case to get into trouble. Ball powder and mag primers...

    Liked On: 13-10-2021, 10:06 AM

15. 
    RugerM77 liked post by Dama dama On thread : Recipe for Howa 1500 .308

    My main rifle is a howa 1500 in .308win for which I reload. I don't think there is any advice i would give that wouldn't apply to any other 308. 2206H is ideal, and probably the most versatile...

    Liked On: 11-10-2021, 04:24 PM

Page 23 of 27 First ... 9101112131415161718192021222324252627 Last

• Jump to page: