shananah
Member

41 Likes

Page 2 of 3 First 123 Last

• Jump to page:

1. 
   kristopher liked post by shananah On thread : 26mm Rings?

   Gary's offer sounds like a good'un, but, if it doesn't work out, getting some 1" rings reamed out by someone with an adjustable reamer as mentioned by NO4 above is certainly doable but take care not...

   Liked On: 16-09-2023, 10:58 AM

2. 
   zimmer liked post by shananah On thread : Die TRedding locking rings.

   Early RCBS dies had a similar locking set up. I found that the lead would make adjustment difficult even with the grub screw backed out a bit but then twigged to giving the lock ring a smart tap with...

   Liked On: 26-08-2023, 01:16 PM

3. 
   -BW- liked post by shananah On thread : my 7x60 wildcat project

   I reformed some 270 Win Norma cases into 257 Robts cases years ago in one pass using RCBS 257 Robts full length sizing dies. My lube of choice was Kiwi nugget neutral shoe polish & they all formed in...

   Liked On: 09-08-2023, 10:37 AM

4. 
   Moa Hunter liked post by shananah On thread : my 7x60 wildcat project

   I reformed some 270 Win Norma cases into 257 Robts cases years ago in one pass using RCBS 257 Robts full length sizing dies. My lube of choice was Kiwi nugget neutral shoe polish & they all formed in...

   Liked On: 25-07-2023, 01:21 AM

5. 
   Finnwolf liked post by shananah On thread : Good Ladd aposing the firearms regerstry

   I knew Chas years ago, though not seen him for ages now, we live at opposite ends of the island. I always thought he was one of the clearest thinkers I've ever come across & a man of amazing passion...

   Liked On: 23-07-2023, 09:45 PM

6. 
   buzzman liked post by shananah On thread : Primer question

   I've done the same thing without any hassles, wore leather gloves & a leather apron I used to use for hay making plus of course safety specs. Never had a commercial one go off on me but like zimmer a...

   Liked On: 05-07-2023, 03:26 PM

7. 
   Kiwilad2021 liked post by shananah On thread : Primer question

   I've done the same thing without any hassles, wore leather gloves & a leather apron I used to use for hay making plus of course safety specs. Never had a commercial one go off on me but like zimmer a...

   Liked On: 05-07-2023, 03:15 PM

8. 
   zimmer liked post by shananah On thread : Reloading Equipment Covers

   They make the old 4 litre oil container with the handle & hole cut off tipped upside down over my Lyman Orange Crusher look a bit poor relly. :D

   Liked On: 04-07-2023, 09:45 AM

9. 
   techno retard liked post by shananah On thread : Reloading Equipment Covers

   They make the old 4 litre oil container with the handle & hole cut off tipped upside down over my Lyman Orange Crusher look a bit poor relly. :D

   Liked On: 04-07-2023, 09:43 AM

10. 
    erniec liked post by shananah On thread : Reloading Equipment Covers

    They make the old 4 litre oil container with the handle & hole cut off tipped upside down over my Lyman Orange Crusher look a bit poor relly. :D

    Liked On: 03-07-2023, 11:00 PM

11. 
    Micky Duck liked post by shananah On thread : Longest continuously owned firearms

    Lee Enfield .303 #5 Jungle Carbine, bought in 1970 from Tony Busch's Corner Sports Shop in Nelson, so had it 53 years now. I was fifteen at the time & pestered the bejeezuz out of my folks till they...

    Liked On: 02-07-2023, 05:24 PM

12. 
    norsk liked post by shananah On thread : Longest continuously owned firearms

    Lee Enfield .303 #5 Jungle Carbine, bought in 1970 from Tony Busch's Corner Sports Shop in Nelson, so had it 53 years now. I was fifteen at the time & pestered the bejeezuz out of my folks till they...

    Liked On: 01-07-2023, 10:43 PM

13. 
    Moa Hunter liked post by shananah On thread : Longest continuously owned firearms

    Lee Enfield .303 #5 Jungle Carbine, bought in 1970 from Tony Busch's Corner Sports Shop in Nelson, so had it 53 years now. I was fifteen at the time & pestered the bejeezuz out of my folks till they...

    Liked On: 01-07-2023, 10:28 PM

14. 
    PipIstrelle liked post by shananah On thread : Can someone help out with trimming?

    Plus 1 for the Lee case trimmers. I've got a Forster set up which is handy for those odd cases I don't have a trimmer for but the Lee trimmer was my go to when I was doing a heap of reloading.

    Liked On: 22-02-2023, 08:24 AM

15. 
    Burb122 liked post by shananah On thread : Guess the round

    8mm or 7.92 Kurz in some places'

    Liked On: 21-02-2023, 07:59 PM

Page 2 of 3 First 123 Last

• Jump to page: