shananah
Member

34 Likes

Page 1 of 3 123 Last

• Jump to page:

1. 
   bluecod1967 liked post by shananah On thread : 7x57 case from 270 has anyone tried

   I did some 257 Robts case from .270 cases years ago, found I had to neck ream them as there was quite a bit of thickening at the base of the neck where the .270 shoulder was swaged into the .257...

   Liked On: 17-03-2024, 08:53 PM

2. 
   308 liked post by shananah On thread : Old Powder

   I had some Nobels 80 that I used with cast bullets in a .303, it was a good bulky powder so no chance of a double charge, no idea off the top of my head what load I used, about 10grs rings a bell but...

   Liked On: 18-01-2024, 10:42 PM

3. 
   Jhon liked post by shananah On thread : Old Powder

   I had some Nobels 80 that I used with cast bullets in a .303, it was a good bulky powder so no chance of a double charge, no idea off the top of my head what load I used, about 10grs rings a bell but...

   Liked On: 18-01-2024, 04:44 PM

4. 
   Happy Jack liked post by shananah On thread : Glasses and shooting

   I may be one of the lucky ones, I have some age related short sightedness & went to Spec Savers for something a bit better than the hobby glasses I was wearing, got bifocals rather than progs but to...

   Liked On: 12-01-2024, 06:00 AM

5. 
   Hugh Shields liked post by shananah On thread : Prepping new brass ?

   Fwiw, I reckon Oldbloke is on the money, push the primers out with a depriming die, there was a thread on this quite recently...

   Liked On: 28-12-2023, 04:33 PM

6. 
   XR500 liked post by shananah On thread : Club Broken into, Rifles Stolen

   It's a sad fact that the advent of battery disc grinders with skinny cut off discs has rendered pretty much any security ineffective, short of something so massive as to be prohibitively expensive,...

   Liked On: 10-12-2023, 03:04 PM

7. 
   Micky Duck liked post by shananah On thread : Club Broken into, Rifles Stolen

   It's a sad fact that the advent of battery disc grinders with skinny cut off discs has rendered pretty much any security ineffective, short of something so massive as to be prohibitively expensive,...

   Liked On: 09-12-2023, 05:38 PM

8. 
   Micky Duck liked post by shananah On thread : Tim Wallis

   That would have been quite a few severals I think, he pranged the XIV in 1996 & didn't fly again afaik. I don't think I'm being unfair to describe Sir Tim as a bit of a larrikin, it was the way he...

   Liked On: 20-10-2023, 11:38 AM

9. 
   kristopher liked post by shananah On thread : 26mm Rings?

   Gary's offer sounds like a good'un, but, if it doesn't work out, getting some 1" rings reamed out by someone with an adjustable reamer as mentioned by NO4 above is certainly doable but take care not...

   Liked On: 16-09-2023, 10:58 AM

10. 
    zimmer liked post by shananah On thread : Die TRedding locking rings.

    Early RCBS dies had a similar locking set up. I found that the lead would make adjustment difficult even with the grub screw backed out a bit but then twigged to giving the lock ring a smart tap with...

    Liked On: 26-08-2023, 01:16 PM

11. 
    -BW- liked post by shananah On thread : my 7x60 wildcat project

    I reformed some 270 Win Norma cases into 257 Robts cases years ago in one pass using RCBS 257 Robts full length sizing dies. My lube of choice was Kiwi nugget neutral shoe polish & they all formed in...

    Liked On: 09-08-2023, 10:37 AM

12. 
    Moa Hunter liked post by shananah On thread : my 7x60 wildcat project

    I reformed some 270 Win Norma cases into 257 Robts cases years ago in one pass using RCBS 257 Robts full length sizing dies. My lube of choice was Kiwi nugget neutral shoe polish & they all formed in...

    Liked On: 25-07-2023, 01:21 AM

13. 
    Finnwolf liked post by shananah On thread : Good Ladd aposing the firearms regerstry

    I knew Chas years ago, though not seen him for ages now, we live at opposite ends of the island. I always thought he was one of the clearest thinkers I've ever come across & a man of amazing passion...

    Liked On: 23-07-2023, 09:45 PM

14. 
    buzzman liked post by shananah On thread : Primer question

    I've done the same thing without any hassles, wore leather gloves & a leather apron I used to use for hay making plus of course safety specs. Never had a commercial one go off on me but like zimmer a...

    Liked On: 05-07-2023, 03:26 PM

15. 
    Kiwilad2021 liked post by shananah On thread : Primer question

    I've done the same thing without any hassles, wore leather gloves & a leather apron I used to use for hay making plus of course safety specs. Never had a commercial one go off on me but like zimmer a...

    Liked On: 05-07-2023, 03:15 PM

Page 1 of 3 123 Last

• Jump to page: