The cleanest way to Flux lead is to stir it with a wooden stick the carbon from the stick is the best flux; like sawdust without the rubbish floating around, Bee's and Candle wax do flux but not...
Liked On: 09-04-2022, 04:19 PM
A 1:12" twist will handle bullets from 100 grs to 200 grs as the biggest animals we shoot are Deer bullets from a .308 really don't need to be heavier than 180 grs you start losing velocity going...
Liked On: 09-04-2022, 11:51 AM
A 1:12" twist will handle bullets from 100 grs to 200 grs as the biggest animals we shoot are Deer bullets from a .308 really don't need to be heavier than 180 grs you start losing velocity going...
Liked On: 09-04-2022, 07:44 AM
A 1:12" twist will handle bullets from 100 grs to 200 grs as the biggest animals we shoot are Deer bullets from a .308 really don't need to be heavier than 180 grs you start losing velocity going...
Liked On: 09-04-2022, 07:39 AM
You will have a stability problem with the 175 grain at subsonic velocity the 160 grain 7mm I sell is very marginal at 1000fps it is starting to tip at 50 metres the 175 are quite a bit longer, I...
Liked On: 06-04-2022, 03:54 PM
You will have a stability problem with the 175 grain at subsonic velocity the 160 grain 7mm I sell is very marginal at 1000fps it is starting to tip at 50 metres the 175 are quite a bit longer, I...
Liked On: 06-04-2022, 03:09 PM
You will have a stability problem with the 175 grain at subsonic velocity the 160 grain 7mm I sell is very marginal at 1000fps it is starting to tip at 50 metres the 175 are quite a bit longer, I...
Liked On: 06-04-2022, 03:01 PM
You will have a stability problem with the 175 grain at subsonic velocity the 160 grain 7mm I sell is very marginal at 1000fps it is starting to tip at 50 metres the 175 are quite a bit longer, I...
Liked On: 06-04-2022, 01:03 PM
The problem with factory Blackout loads is they are optimised for the AR15 platform the gas system bleeds off gas to operate the action bolt actions use all the gas for velocity unless you reload...
Liked On: 31-03-2022, 10:10 PM
The problem with factory Blackout loads is they are optimised for the AR15 platform the gas system bleeds off gas to operate the action bolt actions use all the gas for velocity unless you reload...
Liked On: 31-03-2022, 10:12 AM
The problem with factory Blackout loads is they are optimised for the AR15 platform the gas system bleeds off gas to operate the action bolt actions use all the gas for velocity unless you reload...
Liked On: 30-03-2022, 10:48 PM
You could try Hornady SST's or If like you say only out to 100 metres a 150 Round nose any bullet for the 30/30 the 170 grain are a great deer bullet very popular in the USA,
Liked On: 26-03-2022, 06:22 PM
You could try Hornady SST's or If like you say only out to 100 metres a 150 Round nose any bullet for the 30/30 the 170 grain are a great deer bullet very popular in the USA,
Liked On: 22-03-2022, 07:12 PM
When I had my one I got fed up with make the paper cartridges, and just dropped a bullet in the barrel and filled it with powder worked better than the cartridges with more consistent ignition.
Liked On: 18-03-2022, 02:33 PM
It happens to everyone with cast bullets at some time specially with a new gun, Cast bullets don't like being jammed into the rifling just a light touch; better to seat to the crimp groove if it has...
Liked On: 16-02-2022, 10:39 PM