shooternz
Member

911 Likes

Page 14 of 61 First 12345678910111213141516171819202122232425262728 ... Last

• Jump to page:

1. 
   shooternz liked post by R93 On thread : Load issues (blowback) 454 Casull

   Max load getting blowback? Sounds a bit odd. I would just change powder and see how that goes. Sent from my SM-T510 using Tapatalk

   Liked On: 07-12-2020, 09:52 AM

2. 
   shooternz liked post by bunji On thread : Lightweight loads for 30-06

   One of the rifles l have never been able to bring myself to sell is a nearly 20 yr old Rem Mountain rifle in 06 my wife brought me. I have taken it around the world as my back up rifle as a guide,...

   Liked On: 04-12-2020, 01:25 PM

3. 
   shooternz liked post by Moa Hunter On thread : Fireforming New Brass

   Which case is the longer ? With Ackley cases they are designed slightly shorter than the parent, meaning that 2506 factory loads can be fired in a 2506 Ackley chamber as an example and headspace...

   Liked On: 04-12-2020, 01:22 PM

4. 
   shooternz liked post by veitnamcam On thread : 223 loads for wind

   53 gr vmax is probably the best bc bullet you will shoot out of a 12 twist. Drift being both a fuction of bc and speed run some numbers and see what you get.

   Liked On: 29-11-2020, 02:02 PM

5. 
   shooternz liked post by caberslash On thread : Tactical High Powered Scope Confusion

   154701

   Liked On: 28-11-2020, 04:07 PM

6. 
   shooternz liked post by Moa Hunter On thread : Meat hunter in NZ

   He Recovers ALL of the meat and said he had the rest of the day packing it out with the one stag. That second stag was in his prime and carried a top notch head so better to leave him as a breeder...

   Liked On: 28-11-2020, 03:32 PM

7. 
   shooternz liked post by Shadowsol On thread : Meat hunter in NZ

   I haven't watched the NZ episodes (will do now though) - but I have watched the last 3 seasons - I can see some of the reasons they may not like the NZ hunting scene, some of them I agree with. ...

   Liked On: 28-11-2020, 03:28 PM

8. 
   shooternz liked post by Micky Duck On thread : newbie right here please help

   welcome...personally I use winchester 748...one of the origonal powders made for the 308...its very easy to measure. you really really SHOULD have a reloading manual...one of them old fashioned book...

   Liked On: 21-11-2020, 11:14 AM

9. 
   shooternz liked post by zimmer On thread : Thoughts on new barrel ' break-in '

   Someone will chime in here with Gale McMillan's recommendation of barrels not needing running in. Gale is well gone now but even the current custom barrel makers are 50:50 run-in/don't need to. I...

   Liked On: 19-11-2020, 10:50 AM

10. 
    shooternz liked post by Ryan_Songhurst On thread : Thoughts on new barrel ' break-in '

    Just shoot it

    Liked On: 19-11-2020, 10:49 AM

11. 
    shooternz liked post by dannyb On thread : Suppressors with internal muzzle brake

    Me and a mate both have 7mm rem mags, he has a gunworks maximus, I have a DPT mk11 with stainless blast baffle they both feel the same to shoot. The gunworks maximus is a little quieter but it is...

    Liked On: 19-11-2020, 10:35 AM

12. 
    shooternz liked post by Friwi On thread : Suppressors with internal muzzle brake

    https://www.youtube.com/watch?v=ULdgBrbUJRk No real advantage, but if it can be a feel good factor for some...

    Liked On: 19-11-2020, 10:34 AM

13. 
    shooternz liked post by kiwi-adam On thread : Powder Use By Date?

    Dupont IMR4895 smells like spirits, and has zero rust inside. AR2208 smells a bit stronger, but still not vinigery or acidic.153866

    Liked On: 18-11-2020, 02:13 PM

14. 
    shooternz liked post by Pommy On thread : Tikka barrels questions

    A carbide cutting bit is much cheaper to replace than a reamer.

    Liked On: 10-11-2020, 03:29 PM

15. 
    shooternz liked post by gundoc On thread : Fire cracking, barrel erosion

    Bore scopes are handy if you are actually making barrels. As a gunsmith with more than 50 years experience I have never found the need for one, and regular firearms owners have even less need. The...

    Liked On: 09-11-2020, 05:41 PM

Page 14 of 61 First 12345678910111213141516171819202122232425262728 ... Last

• Jump to page: