shooternz
Member

911 Likes

Page 5 of 61 First 1234567891011121314151617181955 ... Last

• Jump to page:

1. 
   shooternz liked post by No.3 On thread : .22lr barrel break in and cleaning

   Not in theory, but keep an eye on it in humidity conditions. Also monitor for lube/crap buildup in the extractor slot and action areas, and in the barrel. A careful use of a bore snake will...

   Liked On: 30-08-2022, 12:35 PM

2. 
   shooternz liked post by Rated M for Magnum On thread : IMR 4955-7mm08

   IMR 4895 would be my pick, very easy to work with and very good in the 7mm08.

   Liked On: 30-08-2022, 12:29 PM

3. 
   shooternz liked post by Trigger On thread : 8mm Mauser reloading cost

   500 grams of powder is around 7716.18 grains. If you have a load-data (XX+ grains) in mind, do the powder math x 1000 = weight of powder required. Add the cost of 1000 large rifle primers, 1000 brass...

   Liked On: 30-08-2022, 12:26 PM

4. 
   shooternz liked post by Steelisreal On thread : Getting ES down with 223

   A ladder test of one shot at each charge weight is statistically utterly worthless. Might as well write the charge weights on a bit of paper and draw them out of a hat - has the same chance of...

   Liked On: 28-08-2022, 12:35 PM

5. 
   shooternz liked post by Plinky On thread : Norma vs Lapua Brass: Pressure

   Have found pressure reached sooner with lapua, less case capacity usually meaning less powder for same velocity.

   Liked On: 27-08-2022, 02:15 PM

6. 
   shooternz liked post by Tentman On thread : Norma vs Lapua Brass: Pressure

   Do they have the same internal volume? . .. if not then identical loads will produce different pressures right there. Ive recently used both in 6.5x55 with modern "snotty" loads and they were very...

   Liked On: 27-08-2022, 02:14 PM

7. 
   shooternz liked post by Micky Duck On thread : Hot vs Cold Primers, Load Data

   Ive used win LRM in the wee 7.62x39mm case with no issues...cause I had them on hand and no std ones.... it is after all the spark plug in the equasion....as long as you have enough spark to make...

   Liked On: 27-08-2022, 01:35 PM

8. 
   shooternz liked post by omark On thread : Hot vs Cold Primers, Load Data

   Makes no difference unless you are a benchrest shooter. Hotter magnum primers are needed to Get better burn with ball powders only

   Liked On: 27-08-2022, 01:34 PM

9. 
   shooternz liked post by Micky Duck On thread : Hot vs Cold Primers, Load Data

   unless you are hotrodding the load..it SHOULDNT make a hell of a lot of difference...if you are right up on edge of pressure or using a very small volume case however...all bets are off.

   Liked On: 27-08-2022, 01:34 PM

10. 
    shooternz liked post by Marty Henry On thread : .357 135gn WC

    Try them backwards that alters the engagement with the rifling and aerodynamics

    Liked On: 26-08-2022, 07:59 PM

11. 
    shooternz liked post by Friwi On thread : Best bang for buck 222/223 action

    Thehowa mini is probably the best bang for your buck. A Shultz and Larsen 223 with an extra pair of barrels in 204 and 300 blackout would be mean :-)

    Liked On: 25-08-2022, 05:34 PM

12. 
    shooternz liked post by Ruger7mm On thread : NZSCALES

    As MD said, and if you are loading for one load consistently use a powder thrower like a Lee. I have two one set for 243 and the other for my 284 to throw just under the required charge weight, and...

    Liked On: 24-08-2022, 07:08 PM

13. 
    shooternz liked post by Micky Duck On thread : NZSCALES

    how are beam scales slow???? seriously by a $30-40 set of lee spoons....you will be throwing powder charge into scale pan and trickle up the last wee bit...of tipping it off side of teaspoon by...

    Liked On: 24-08-2022, 07:05 PM

14. 
    shooternz liked post by Micky Duck On thread : 30-40 krag load data

    for game 16grns hercules24000 giving 1500fps under 180grn cast in almost any military calibre,,,,can sustitute hercules with....17grns of4227,either imr or hodgdon 18grns of H 4198 21grns of RL--7...

    Liked On: 15-08-2022, 12:57 AM

15. 
    shooternz liked post by Micky Duck On thread : 30-40 krag load data

    page 76 1994 handloaders digest i have loaded gascheckdesign bullets for yearswithout the gascheckfor years in just about any 30cal rifle using 7 grains of lmost any fast-burning pistol powder...

    Liked On: 15-08-2022, 12:55 AM

Page 5 of 61 First 1234567891011121314151617181955 ... Last

• Jump to page: