shooternz
Member

979 Likes

Page 21 of 66 First ... 7891011121314151617181920212223242526272829303132333435 ... Last

• Jump to page:

1. 
   winaa liked post by shooternz On thread : Subsonic 7mm loads

   The problem with the 7mm as a subsonic calibre is the twist rate it won't stabilise bullets longer than my 133 HP and the higher velocity is limited by the twist rate to 1700fps it really is too...

   Liked On: 20-08-2021, 05:03 PM

2. 
   Micky Duck liked post by shooternz On thread : Subsonic 7mm loads

   The problem with the 7mm as a subsonic calibre is the twist rate it won't stabilise bullets longer than my 133 HP and the higher velocity is limited by the twist rate to 1700fps it really is too...

   Liked On: 20-08-2021, 01:11 PM

3. 
   Marty Henry liked post by shooternz On thread : Subsonic 7mm loads

   The problem with the 7mm as a subsonic calibre is the twist rate it won't stabilise bullets longer than my 133 HP and the higher velocity is limited by the twist rate to 1700fps it really is too...

   Liked On: 20-08-2021, 11:33 AM

4. 
   Micky Duck liked post by shooternz On thread : 25cal hp casting oops

   Would still pay to find some way of fixing it permanently in place screws tend to shake loose when casting a lot, You need to watch the block alignment pins as well a couple of my moulds they have...

   Liked On: 18-08-2021, 08:05 PM

5. 
   Micky Duck liked post by shooternz On thread : 25cal hp casting oops

   Nope HP's are more accurate than solids all my HP moulds come with pins for both HP and solid and in every case the HP is more accurate the reason is the centre of gravity is moved more to the rear...

   Liked On: 18-08-2021, 08:01 PM

6. 
   Micky Duck liked post by shooternz On thread : 25cal hp casting oops

   My NOE moulds have a different setup for the HP I order the RG2 and RG4 style, And I never smoke them I give them a good cleaning in hot soapy water and heat them to 350 to 400 F and cool a couple...

   Liked On: 18-08-2021, 08:00 PM

7. 
   Tertle liked post by shooternz On thread : 25cal hp casting oops

   Would still pay to find some way of fixing it permanently in place screws tend to shake loose when casting a lot, You need to watch the block alignment pins as well a couple of my moulds they have...

   Liked On: 18-08-2021, 07:08 PM

8. 
   winaa liked post by shooternz On thread : 25cal hp casting oops

   Nope HP's are more accurate than solids all my HP moulds come with pins for both HP and solid and in every case the HP is more accurate the reason is the centre of gravity is moved more to the rear...

   Liked On: 18-08-2021, 06:37 PM

9. 
   Tertle liked post by shooternz On thread : 25cal hp casting oops

   Nope HP's are more accurate than solids all my HP moulds come with pins for both HP and solid and in every case the HP is more accurate the reason is the centre of gravity is moved more to the rear...

   Liked On: 18-08-2021, 02:59 PM

10. 
    Tertle liked post by shooternz On thread : 25cal hp casting oops

    My NOE moulds have a different setup for the HP I order the RG2 and RG4 style, And I never smoke them I give them a good cleaning in hot soapy water and heat them to 350 to 400 F and cool a couple...

    Liked On: 18-08-2021, 02:53 PM

11. 
    Micky Duck liked post by shooternz On thread : Projectile performance

    If hunting and shots are inside 200 metres a medium heavy round nose projectile is the best choice like the 6mm 100/105 RN 25 cal 117 RN the 6.5 156/160 RN 7mm 175 RN and the .30 180 RN as long as...

    Liked On: 14-08-2021, 10:31 AM

12. 
    7mmwsm liked post by shooternz On thread : Projectile performance

    If hunting and shots are inside 200 metres a medium heavy round nose projectile is the best choice like the 6mm 100/105 RN 25 cal 117 RN the 6.5 156/160 RN 7mm 175 RN and the .30 180 RN as long as...

    Liked On: 14-08-2021, 08:27 AM

13. 
    zimmer liked post by shooternz On thread : Parker Hale ‘NEVER NICKEL’

    You are correct Parker Hale never nickel was use to stop meal fouling by Full bore shooters I have a bottle of it I got when I bought a retired No4 Full bore rifle they stopped using it when the NRA...

    Liked On: 25-07-2021, 05:20 PM

14. 
    veitnamcam liked post by shooternz On thread : Closing the bolt...fire a cartridge?

    Yes it can fire I had it happen to me with a Remington 700 not because of a lightend trigger it was an unburnt powder kennel in the trigger stopped the sear engaging fully plus a 32 pound firing...

    Liked On: 25-07-2021, 05:02 PM

15. 
    Finnwolf liked post by shooternz On thread : Parker Hale ‘NEVER NICKEL’

    You are correct Parker Hale never nickel was use to stop meal fouling by Full bore shooters I have a bottle of it I got when I bought a retired No4 Full bore rifle they stopped using it when the NRA...

    Liked On: 25-07-2021, 04:48 PM

Page 21 of 66 First ... 7891011121314151617181920212223242526272829303132333435 ... Last

• Jump to page: