shooternz
Member

979 Likes

Page 22 of 66 First ... 89101112131415161718192021222324252627282930313233343536 ... Last

• Jump to page:

1. 
   Micky Duck liked post by shooternz On thread : .303 Cast bullets

   Looked into it but the kits that are available don't crimp on to the bullet like the commercial ones do, Ok for personal use but I don't think customers would appreciate getting a 100 bullets with...

   Liked On: 26-06-2021, 06:36 PM

2. 
   Cordite liked post by shooternz On thread : .303 Cast bullets

   Hi Guy's I have bought a new mould for the .303 It casts a 210 grain bullet .314" with a .304" nose only have a few hundred due to Gas Checks being unavailable at present Get in touch if you...

   Liked On: 24-06-2021, 11:43 PM

3. 
   Micky Duck liked post by shooternz On thread : .303 Cast bullets

   I have only shot 10 of them, selling them so fast i never have any left for myself, A friend says 24.0 grains 2206H is good 2205 or 2207 starting at 20.0 grains should be ok also IMR 3031 at 20.0...

   Liked On: 23-06-2021, 08:07 PM

4. 
   Rees liked post by shooternz On thread : ruger 1 303s in nz

   There were a few came in I saw one fore sale about 15 years ago, I think collectors snapped them up never to see the light of day again, From what I have read they are only good for cast bullets the...

   Liked On: 23-06-2021, 04:26 AM

5. 
   Rees liked post by shooternz On thread : .303 Cast bullets

   Hi Guy's I have bought a new mould for the .303 It casts a 210 grain bullet .314" with a .304" nose only have a few hundred due to Gas Checks being unavailable at present Get in touch if you...

   Liked On: 23-06-2021, 04:25 AM

6. 
   Three O'Three liked post by shooternz On thread : .303 Cast bullets

   I have only shot 10 of them, selling them so fast i never have any left for myself, A friend says 24.0 grains 2206H is good 2205 or 2207 starting at 20.0 grains should be ok also IMR 3031 at 20.0...

   Liked On: 22-06-2021, 11:40 PM

7. 
   mimms2 liked post by shooternz On thread : Powder for 303 150's

   I have never had any luck with 150 gr in any of the .303's I have loaded for always got better accuracy with 174 and 180 and the best was 215 gr Norma, Woodleigh still makes the 215 gr go to...

   Liked On: 22-06-2021, 03:09 PM

8. 
   veitnamcam liked post by shooternz On thread : .303 Cast bullets

   Hi Guy's I have bought a new mould for the .303 It casts a 210 grain bullet .314" with a .304" nose only have a few hundred due to Gas Checks being unavailable at present Get in touch if you...

   Liked On: 21-06-2021, 08:44 PM

9. 
   Micky Duck liked post by shooternz On thread : .303 Cast bullets

   Hi Guy's I have bought a new mould for the .303 It casts a 210 grain bullet .314" with a .304" nose only have a few hundred due to Gas Checks being unavailable at present Get in touch if you...

   Liked On: 21-06-2021, 08:11 PM

10. 
    rossi.45 liked post by shooternz On thread : The Lever Aficionados Thread

    Hi guys, I am thinking about getting a new mould for the 30/30, Just posting here to see if there is any interest from you lever action shooters in a 170 grain FP cast bullet it will be a clone of...

    Liked On: 09-06-2021, 07:23 PM

11. 
    rewa liked post by shooternz On thread : My first load development

    Don't worry about velocity just work on the accuracy work up a few 10ths of a grain and see it the accuracy improves or not, then shoot in at 200m and 300m you can work out the velocity by the drop...

    Liked On: 29-05-2021, 08:59 PM

12. 
    superdiver liked post by shooternz On thread : My first load development

    Don't worry about velocity just work on the accuracy work up a few 10ths of a grain and see it the accuracy improves or not, then shoot in at 200m and 300m you can work out the velocity by the drop...

    Liked On: 24-05-2021, 06:16 PM

13. 
    Gkp liked post by shooternz On thread : My first load development

    Don't worry about velocity just work on the accuracy work up a few 10ths of a grain and see it the accuracy improves or not, then shoot in at 200m and 300m you can work out the velocity by the drop...

    Liked On: 24-05-2021, 07:23 AM

14. 
    Micky Duck liked post by shooternz On thread : My first load development

    Don't worry about velocity just work on the accuracy work up a few 10ths of a grain and see it the accuracy improves or not, then shoot in at 200m and 300m you can work out the velocity by the drop...

    Liked On: 23-05-2021, 09:49 PM

15. 
    Mark M liked post by shooternz On thread : Hornady Brass Primer Seating Problems

    Most .223 and .308 primers are crimped or sealed being Military calibres they don't bother changing to non crimped when making civilian ammo Americans are not reloaders as much as we are, The main...

    Liked On: 21-05-2021, 06:44 AM

Page 22 of 66 First ... 89101112131415161718192021222324252627282930313233343536 ... Last

• Jump to page: