A while ago I replaced my general hunting rifle which was a Howa 1500 in .308 with a Tikka t3x Superlite in 6.5CM. Went down a calibre to reduce recoil with a lighter rifle and felt like trying...
Liked On: 26-12-2024, 08:19 PM
Hunted the area back in the 70-80s no deer back then but truck loads of goats and pigs, no hut either. We had some huge bomb ups back then great trips into there back then.
Liked On: 19-12-2024, 09:26 PM
Looks like good place to take your 45/70
Liked On: 17-12-2024, 05:13 PM
Just about completed now, I finally got the anodizing back today and also changed to a more suitable stock for this project. Final testing tomorrow with a couple of baffle options then off its goes...
Liked On: 12-12-2024, 11:20 AM
Trueflite have a reamer on the way
Liked On: 02-12-2024, 08:00 PM
Had a challenging job on this week, making a missing sight element for an old 1920s BSA air gun. The smaller the parts the harder it gets, primarily the issue is not cutting it off the stock too...
Liked On: 29-11-2024, 07:38 PM
If we succeed in removing all causes of reproductive defects will that mean we will get no more politicians? Just asking....
Liked On: 29-11-2024, 04:36 PM
I got round to making the 300 Blackout (thanks for those who commented to the earlier post), based on a Howa 1500, I cut the barrel down and reduced the profile. I then tried a couple of baffle...
Liked On: 19-11-2024, 06:35 PM
Here is a close up of the extractor, showing the spring loaded detent that extracts the case. It is held in place against the spring by a roll pin. 251233 Once this was all sorted the barrel...
Liked On: 15-11-2024, 11:05 PM
Use my lee hand press heaps, glued some timber inserts into the alumium frame & grip it in a vice, behaves like an single stage press, often goes to the range with me so as to adjust seating depths,...
Liked On: 11-11-2024, 11:35 AM
This is brilliant advice. Try and buddy up with him! :D Honestly the best option is to buddy up with a reliable and steady hunter who is prepared to take the time with you. You could make...
Liked On: 04-11-2024, 10:11 PM
Welcome aboard mate. As a recent convert to the sport I can give you some pointers as to where and how to get started. I am by no means an expert and am still learning things every free weekend I can...
Liked On: 04-11-2024, 10:08 PM
There was plenty of surface rust on the action and remains of the shotgun barrel so I was going to paint the metalwork with black etch primer, but decided to give cold blueing a go. Stripped and...
Liked On: 02-11-2024, 10:48 PM
The rounds that I put through this die and made a considerable hollow point, work very well on small game. Bullet started out as a Winchester 42gn powerpoint, which had poor to average expansion on...
Liked On: 19-10-2024, 10:06 PM
You've given a really great description of the club and what it stands for. You've won us over, see yahs next Wednesday
Liked On: 02-10-2024, 12:20 PM