I spent a bit more time on this today in between feeding the CNC. I found a handy bit of thick wall tube in my scrap bin, along with a piece of 10mm plate large enough for the lid. I turned the...
Liked On: 07-01-2025, 09:11 PM
I spent a bit more time on this today in between feeding the CNC. I found a handy bit of thick wall tube in my scrap bin, along with a piece of 10mm plate large enough for the lid. I turned the...
Liked On: 07-01-2025, 08:48 PM
Made a start today. I picked up 1.2m of 200x200x9 square hollow section plus had the steel shop plasma cut a 20mm plate for the bottom. I fired up the arc welder and glued the plate to the bottom of...
Liked On: 06-01-2025, 09:33 PM
Made a start today. I picked up 1.2m of 200x200x9 square hollow section plus had the steel shop plasma cut a 20mm plate for the bottom. I fired up the arc welder and glued the plate to the bottom of...
Liked On: 06-01-2025, 08:03 PM
The annual Charles Upham Memorial Match is being held at Clevedon Rifle Club in Auckland on the 18th and 19th of January. This is one of New Zealand's oldest sporting trophies, going back to the...
Liked On: 05-01-2025, 07:15 PM
The annual Charles Upham Memorial Match is being held at Clevedon Rifle Club in Auckland on the 18th and 19th of January. This is one of New Zealand's oldest sporting trophies, going back to the...
Liked On: 05-01-2025, 05:00 PM
The annual Charles Upham Memorial Match is being held at Clevedon Rifle Club in Auckland on the 18th and 19th of January. This is one of New Zealand's oldest sporting trophies, going back to the...
Liked On: 05-01-2025, 04:55 PM
I think it's largely a case of many of these clubs having an extremely poor online presence. The amount of experienced shooters that I run into with absolutely no knowledge of who the various local...
Liked On: 05-01-2025, 01:59 PM
I agree this is how you should zero a hunting rifle, however for load dev I am trying to remove as many variables as possible and measure just the load, so I do load dev from bags, either prone or on...
Liked On: 31-12-2024, 11:28 AM
Something nobody talks about with these types of rifles is correct shooting technique. Do you have other high recoiling rifles that you can shoot consistently good groups with? Once the recoil...
Liked On: 30-12-2024, 08:49 PM
Something nobody talks about with these types of rifles is correct shooting technique. Do you have other high recoiling rifles that you can shoot consistently good groups with? Once the recoil...
Liked On: 30-12-2024, 05:24 PM
https://www.facebook.com/61568804101202/posts/pfbid058DYujQ6cuyzqAXnYm4fDXXJRQSxuDngCZd21TByBcPSLdwynMiNGYacx5UFZj4Ml/?app=fbl I am the man behind them. I have setup a company to produce these...
Liked On: 27-12-2024, 05:29 PM
I recently did a hike into Leitch's Hut with the Mrs and took a rifle along just in case. I knew there had been cullers in there for the last couple of months, but its a large area so figured there...
Liked On: 27-12-2024, 04:59 PM
I love it. Have you tried them out yet? I have been playing around with the same idea, but in 338. What insert do you use for copper? I am getting mixed results with aluminum inserts and am...
Liked On: 27-12-2024, 03:29 PM
https://www.facebook.com/61568804101202/posts/pfbid058DYujQ6cuyzqAXnYm4fDXXJRQSxuDngCZd21TByBcPSLdwynMiNGYacx5UFZj4Ml/?app=fbl I am the man behind them. I have setup a company to produce these...
Liked On: 27-12-2024, 09:55 AM