Hey Folks, I have been working on a 22lr resizing / hollow pointing tool. What I have made is basically a direct copy of the Neal Waltz die, with a couple of minor changes. His design is by far the...
Liked On: 06-02-2023, 03:25 AM
I am getting around 4 MOA at 100yds with greek ammo. I have found that a simple shake test seems to cull all the corroded / hang fire / dud primer rounds. I shake the cartridge beside my ear, and if...
Liked On: 22-01-2023, 04:42 PM
Thanks Gents, that's exactly the info I needed and I have enough to go on now. I have loaded up 50 rounds in the range of 37-38gr and we will see how they come out, I'm off to test on Friday. ...
Liked On: 22-01-2023, 09:56 AM
I managed to get some 2208 recently and did some testing last night. My results were as follows Factory Greek - 2490fps 38gr 2206H - 2290fps 40gr 2208 - 2340fps My reloads are significantly...
Liked On: 19-01-2023, 12:24 PM
The way I see it, it's a military rifle that someone tried to convert to a target rifle, I'm just moving it back a bit towards it's original form.
Liked On: 04-01-2023, 06:30 PM
Thanks Gents, that's exactly the info I needed and I have enough to go on now. I have loaded up 50 rounds in the range of 37-38gr and we will see how they come out, I'm off to test on Friday. ...
Liked On: 04-01-2023, 06:01 PM
That's very cool, I really like it. I'm impressed that you managed to get an old 22 to fit into an airsoft frame and come out looking good, there is some tricky work in there. Have you thought about...
Liked On: 28-12-2022, 11:46 PM
That looks very interesting. Is the barrel an integral suppressor? Is it a semi-auto you have converted to single shot? What did it look like when you started?
Liked On: 28-12-2022, 09:00 AM
I spent some time this afternoon trying to make a punch for a truncated cone nose shape. I can tell you now that this is only going to work on the absolute softest ammo, and even then it's pretty...
Liked On: 24-12-2022, 08:02 PM
I did a quick test at 100m the other day with factory Eley Standard and a hollow pointed version of it sized to 0.2250. Groups are 10rds each shot from a custom Semi. Can't really draw too much...
Liked On: 23-12-2022, 12:17 PM
I have also been working on a Tikka 284, re-chambered from 7mm08. Mine is 18" barrel and I managed to get 162gr ELD-M's up to 2775 with 56gr of 2209 which is the only suitable powder I have right...
Liked On: 23-12-2022, 07:50 AM
Hey Folks, I have been working on a 22lr resizing / hollow pointing tool. What I have made is basically a direct copy of the Neal Waltz die, with a couple of minor changes. His design is by far the...
Liked On: 23-12-2022, 07:45 AM
I did a quick test at 100m the other day with factory Eley Standard and a hollow pointed version of it sized to 0.2250. Groups are 10rds each shot from a custom Semi. Can't really draw too much...
Liked On: 23-12-2022, 07:13 AM
I did a quick test at 100m the other day with factory Eley Standard and a hollow pointed version of it sized to 0.2250. Groups are 10rds each shot from a custom Semi. Can't really draw too much...
Liked On: 22-12-2022, 10:56 PM
I wouldnt think renaissance wax would work well, its designed to be polished off and then dry I imagine it would build up hard deposits inside the dies. Awesome for protecting metal work and stocks...
Liked On: 05-12-2022, 09:27 PM