I made a chamber reamer for .357 sig a couple of days ago, and have made a couple of other chamber reamers and several projectile reamers using this technique. Gundoc has it right, except I tend...
Liked On: 16-08-2020, 05:38 PM
A removable pilot is not really required unless you are going to be chambering multiple barrels with variable bore sizes. For a one off job, just sizing the pilot to the barrel on hand is fine. I...
Liked On: 16-08-2020, 01:53 PM
I made a chamber reamer for .357 sig a couple of days ago, and have made a couple of other chamber reamers and several projectile reamers using this technique. Gundoc has it right, except I tend...
Liked On: 16-08-2020, 01:51 PM
I made a chamber reamer for .357 sig a couple of days ago, and have made a couple of other chamber reamers and several projectile reamers using this technique. Gundoc has it right, except I tend...
Liked On: 16-08-2020, 10:24 AM
I made a chamber reamer for .357 sig a couple of days ago, and have made a couple of other chamber reamers and several projectile reamers using this technique. Gundoc has it right, except I tend...
Liked On: 15-08-2020, 08:17 PM
Second this. Prices are good and great quality. Shipping is reasonable and very fast turn around (I usually get stuff the day after I order it in Auckland) I actually made my own tap a little...
Liked On: 11-08-2020, 09:55 PM
Second this. Prices are good and great quality. Shipping is reasonable and very fast turn around (I usually get stuff the day after I order it in Auckland) I actually made my own tap a little...
Liked On: 11-08-2020, 09:16 PM
Second this. Prices are good and great quality. Shipping is reasonable and very fast turn around (I usually get stuff the day after I order it in Auckland) I actually made my own tap a little...
Liked On: 11-08-2020, 08:42 PM
Second this. Prices are good and great quality. Shipping is reasonable and very fast turn around (I usually get stuff the day after I order it in Auckland) I actually made my own tap a little...
Liked On: 11-08-2020, 07:54 PM
I started off reading this somewhat interested as I have always liked 410s. I finished reading this post with my mouth wide open in amazement. I didnt know that shot could be made that way, and...
Liked On: 23-07-2020, 11:40 PM
Hi everyone, I have been working on this project on and off for about a year, along with a bunch of other projects. The idea was to build a heavy barrel 22lr "precision" training rifle. I wanted it...
Liked On: 13-06-2020, 09:08 PM
Looking good. Have you thought about making a mold for the butt stock to make a carbon part that slips over the tube?
Liked On: 26-05-2020, 10:33 PM
I used araldite 24hr for years with good results. The key is to scuff the steel well with at laest 100g paper and clean with acetone. Handle should be freshly sanded the same and free of dust (hit it...
Liked On: 26-04-2020, 08:37 AM
Hi Folks, This is a re-work of a 22lr target rifle I put together a while back, which you can read about here: https://www.nzhuntingandshooting.co.nz/f53/custom-brno-22lr-39671/ 134421 I...
Liked On: 18-04-2020, 02:26 AM
Hi Everyone, I have started work on building a swaging press over the last few days. Based on this idea here Lets make a Swage press...
Liked On: 17-04-2020, 07:51 PM