I spent some time this afternoon trying to make a punch for a truncated cone nose shape. I can tell you now that this is only going to work on the absolute softest ammo, and even then it's pretty...
Liked On: 24-12-2022, 08:02 PM
I did a quick test at 100m the other day with factory Eley Standard and a hollow pointed version of it sized to 0.2250. Groups are 10rds each shot from a custom Semi. Can't really draw too much...
Liked On: 23-12-2022, 12:17 PM
I have also been working on a Tikka 284, re-chambered from 7mm08. Mine is 18" barrel and I managed to get 162gr ELD-M's up to 2775 with 56gr of 2209 which is the only suitable powder I have right...
Liked On: 23-12-2022, 07:50 AM
Hey Folks, I have been working on a 22lr resizing / hollow pointing tool. What I have made is basically a direct copy of the Neal Waltz die, with a couple of minor changes. His design is by far the...
Liked On: 23-12-2022, 07:45 AM
I did a quick test at 100m the other day with factory Eley Standard and a hollow pointed version of it sized to 0.2250. Groups are 10rds each shot from a custom Semi. Can't really draw too much...
Liked On: 23-12-2022, 07:13 AM
I did a quick test at 100m the other day with factory Eley Standard and a hollow pointed version of it sized to 0.2250. Groups are 10rds each shot from a custom Semi. Can't really draw too much...
Liked On: 22-12-2022, 10:56 PM
I wouldnt think renaissance wax would work well, its designed to be polished off and then dry I imagine it would build up hard deposits inside the dies. Awesome for protecting metal work and stocks...
Liked On: 05-12-2022, 09:27 PM
I spent some time this afternoon trying to make a punch for a truncated cone nose shape. I can tell you now that this is only going to work on the absolute softest ammo, and even then it's pretty...
Liked On: 23-11-2022, 05:44 AM
I spent some time this afternoon trying to make a punch for a truncated cone nose shape. I can tell you now that this is only going to work on the absolute softest ammo, and even then it's pretty...
Liked On: 23-11-2022, 04:44 AM
I spent some time this afternoon trying to make a punch for a truncated cone nose shape. I can tell you now that this is only going to work on the absolute softest ammo, and even then it's pretty...
Liked On: 22-11-2022, 10:22 PM
So I have done some costing and have come up with a price of $280 per die set. This would include; - Die body -Adjuster stem and locking ring for the adjuster - 22lr shell holder - A sizing...
Liked On: 22-11-2022, 09:32 PM
So I have done some costing and have come up with a price of $280 per die set. This would include; - Die body -Adjuster stem and locking ring for the adjuster - 22lr shell holder - A sizing...
Liked On: 22-11-2022, 10:20 AM
I have tried a couple of other hollow point styles. One is a much longer but narrower tip. Interestingly, this didn't perform that well, with 2 of 5 rds completely penetrating my wet pack and going...
Liked On: 22-11-2022, 10:09 AM
So I have done some costing and have come up with a price of $280 per die set. This would include; - Die body -Adjuster stem and locking ring for the adjuster - 22lr shell holder - A sizing...
Liked On: 21-11-2022, 02:29 PM
I'm going to have to disagree on the depth of the hollow point. I spent a bit of time yesterday playing around with the really long narrow hollowpoint that I was getting inconsistent results with and...
Liked On: 21-11-2022, 02:27 PM