Smallfoot
Member

64 Likes

Page 3 of 5 First 12345 Last

• Jump to page:

1. 
   Smallfoot liked post by Driverman On thread : Ok you clever buggers...

   Deadeye Dick’s Shooting Supplies is the agent for Forster products who make a tool just for putting a hollow point in a bullet.

   Liked On: 15-06-2021, 10:39 AM

2. 
   Smallfoot liked post by Hunty1 On thread : Have you seen this before

   Circle crimp around the factory primer? What happens if you ream the pocket?

   Liked On: 07-06-2021, 10:08 PM

3. 
   Smallfoot liked post by Micky Duck On thread : Quality "everlasting" .410 shells

   yip ok that makes sense....old black powder rule of thumb is same volume of powder to shot.... cant see any black powder load being hard kicker from what Ive seen in 45/70....60 grns home rolled is...

   Liked On: 07-06-2021, 11:56 AM

4. 
   Smallfoot liked post by Wingman On thread : Quality "everlasting" .410 shells

   All my 410s have patterned best with #4s and #5s. The 11/16oz load in the 3" long plastic wads pattern the best followed by the 3/4oz load with the felt wads.

   Liked On: 07-06-2021, 11:55 AM

5. 
   Smallfoot liked post by Micky Duck On thread : 28 guage

   wrong place to put it...but who cares??? there is some winchester 3/4 oz trap loads on trademe now at $20 a box.......grab it quick for the hulls,or dump out the 9s and poke in something you...

   Liked On: 01-06-2021, 09:31 PM

6. 
   Smallfoot liked post by Wingman On thread : Quality "everlasting" .410 shells

   Sharing the .410 love with another 300+ brass cases made this weekend 169083 169084 169085 169086

   Liked On: 01-06-2021, 06:03 PM

7. 
   Smallfoot liked post by Jhon On thread : 44-40 Reloading/Shooting

   So I got out in the paddock today with some loads. I know Arthur you said go straight to 26gn of AR2207, and you were right, but couldn't help myself lol. Did a short ladder test per below. I did...

   Liked On: 26-05-2021, 11:49 PM

8. 
   Smallfoot liked post by woods223 On thread : making case lube

   I use a 10 parts isoprop. to 1 part lanolin mix. Works fine.

   Liked On: 25-05-2021, 12:18 AM

9. 
   Smallfoot liked post by ebf On thread : 2021 Big Bore - North Island

   The "filthy few" (muzzle loaders) will fit in nicely with the rest of the big boomer crowd - we are not too picky, as long as the bore is LARGE, you are welcome. If more than one person plans to...

   Liked On: 19-05-2021, 11:09 PM

10. 
    Smallfoot liked post by ebf On thread : 2021 Big Bore - North Island

    Righto boys and girls. BRADS has kindly offered to let us invade his paddock & woolshed again . Pencil in Sat 2 October 2021, and get cracking on reloading for your portable canons. Just off...

    Liked On: 19-05-2021, 08:10 PM

11. 
    Smallfoot liked post by Husky1600 On thread : Left eye dominant shooter, left handed rifle?

    It all comes down to muscle memory. From very early on, most people assume you mount a rifle/gun/bow on the right side, without any thought of checking for eye dominance. Then when left eye dominance...

    Liked On: 16-05-2021, 07:39 PM

12. 
    Smallfoot liked post by keengunNic On thread : Cleaning brass...

    I made a rotary wet tumbler as a prototype with random crap i had laying around, drawing up a proper frame now and going to make it out of aluminum at work. Stainless pins are the most expensive part

    Liked On: 12-05-2021, 05:21 PM

13. 
    Smallfoot liked post by kawekakid On thread : Annealing machine

    https://youtu.be/5VCftp2cfeM

    Liked On: 01-05-2021, 02:59 PM

14. 
    Smallfoot liked post by kukuwai On thread : Bird Predator Control

    The trap i won in the swamp comp (outdoor outfitters 150) had its first catch today. https://uploads.tapatalk-cdn.com/20210430/930b8901875f10ada2f396f80544b049.jpg That's two stoats and one...

    Liked On: 01-05-2021, 02:10 PM

15. 
    Smallfoot liked post by akaroa1 On thread : American long rifle build

    100 % finished Steel trigger guard makes it complete 165137

    Liked On: 13-04-2021, 10:34 PM

Page 3 of 5 First 12345 Last

• Jump to page: