http://www.p-d-ent.com/images/sako_85_exige.png http://www.p-d-ent.com/images/sako_85_exige_blued.png 85 Exige (Blued) $2695, available in 30-06 Springfield or 308 Winchester 85 Exige...
Liked On: 01-02-2017, 06:45 AM
I would look into, a 22-250 in fast twist 1-10, both browning and savage make them, or a custom if I buy another. a std 1-14 twist is good to about 60g bullet, but short 63-64g ie win PowerPoint,...
Liked On: 23-01-2017, 08:38 PM
I would look into, a 22-250 in fast twist 1-10, both browning and savage make them, or a custom if I buy another. a std 1-14 twist is good to about 60g bullet, but short 63-64g ie win PowerPoint,...
Liked On: 23-01-2017, 07:00 PM
Gillie, an alternate is to go to the likes of Goughs, or GJ sole, and get a few old cutting edges of a grader, dozer or loader, and fab something up, Have done so the past, Would help, but are...
Liked On: 09-01-2017, 07:38 PM
I have a 6mm Remington, that I use, also had a .243, much prefer the 6mm Remington, bit faster, but found it far easier, to get several, projectiles to similar point of impact, 65gr v-max, and a...
Liked On: 24-12-2016, 01:24 PM
I have both cal's, a Sako 85 finlight in 2506, and a custom Kimber in .260,:thumbsup: had a finlight 85 in .260 that was sold to a member on here,:omg: There is no real world difference, between...
Liked On: 03-12-2016, 09:22 PM
I have both cal's, a Sako 85 finlight in 2506, and a custom Kimber in .260,:thumbsup: had a finlight 85 in .260 that was sold to a member on here,:omg: There is no real world difference, between...
Liked On: 03-12-2016, 12:10 PM
Yes, those are at 50M. I had it out today, it gave a few pretty good groups with 40v-max and 18.5g of H4198 at 100m, two four shot groups at 3/4", but it opens up to 1.5" when hot, Had a few...
Liked On: 07-11-2016, 12:53 PM
Mostly true there about the .204 Ruger shoots faster, flatter and with a higher Bc bullet, I have one a CZ varmint, It wont stabilize the 40gr and is only an average shooter, It is not making the cut...
Liked On: 06-11-2016, 08:58 AM
I have a fair, U/O 16ga,was custom made for me, love it,:) one of the Fair 40th anniversary shotguns. Just got a smoking deal, on a John Dickson & son, SXS in 20 bore, build papers and info from...
Liked On: 03-11-2016, 05:59 PM
Had the 9.3x62 out today, getting ready for a hunt in next few days, New iron sights installed, still a bit high, so will knock out the .410" sight and put on the .445 tonight, or in morning. ...
Liked On: 12-10-2016, 07:04 AM
I run H4381, 120gr Balistic tip or 125gr partion, think 49 and 47.5gr, cant recall speeds, but just under 3000 for the BT, touch less for the 125gr, Lapua brass and rem 9.5 or CCI 200 primers. ...
Liked On: 11-10-2016, 08:56 PM
I run H4381, 120gr Balistic tip or 125gr partion, think 49 and 47.5gr, cant recall speeds, but just under 3000 for the BT, touch less for the 125gr, Lapua brass and rem 9.5 or CCI 200 primers. ...
Liked On: 11-10-2016, 05:26 PM
I currently have four, a American in 17 hornet and .221 fireball, and a varmint in .17 hornet and .204 ruger, I like them , accurate, well made, reliable and in a compact action, Cz rifles have a...
Liked On: 04-09-2016, 01:49 PM
I currently have four, a American in 17 hornet and .221 fireball, and a varmint in .17 hornet and .204 ruger, I like them , accurate, well made, reliable and in a compact action, Cz rifles have a...
Liked On: 02-09-2016, 07:05 PM