steven
Member

1532 Likes

Page 10 of 103 First 12345678910111213141516171819202122232460 ... Last

• Jump to page:

1. 
   steven liked post by Breyt On thread : Annealing questions

   If you need constant accuracy you need to anneal those cases every 1-2 shots

   Liked On: 09-02-2016, 02:59 PM

2. 
   steven liked post by veitnamcam On thread : Annealing questions

   Id back the machine for consistency everytime.

   Liked On: 09-02-2016, 02:58 PM

3. 
   steven liked post by veitnamcam On thread : Annealing questions

   How does the machine vari day by day? that sounds like a human trait.

   Liked On: 09-02-2016, 02:58 PM

4. 
   steven liked post by Breyt On thread : Annealing questions

   You are spot on with your findings regarding variety's. However using automated machine you don't have to skilled. After you did the settings for that case ( Case length to the burner because only...

   Liked On: 09-02-2016, 02:58 PM

5. 
   steven liked post by Beavis On thread : reloading for ar15 carbine

   Where do you get PPU that cheap Doc? I will run it if I can get it at that price.

   Liked On: 07-02-2016, 05:59 PM

6. 
   steven liked post by bully On thread : Fish with .223

   As a young fella with an air rifle I tried shooting a trout once. I used the darts you could get, spike with a kind of hair tail. I clearly remember it, it was a red dart. It near stopped once...

   Liked On: 04-02-2016, 01:30 PM

7. 
   steven liked post by outdoorlad On thread : B endorsement

   That's why I just shoot when I'm in the States for work, no bullshit. Just been in Texas, Walked into a gun range, handed over passport, signed a form, rented a Glock, a CZ75 & away you go. 45216

   Liked On: 04-02-2016, 01:29 PM

8. 
   steven liked post by jim160 On thread : B endorsement

   I work shift work and I know that I would never be able to get to enough days so I have given up on the idea before I started to even try. Bad enough getting to a service rifle shoot.

   Liked On: 04-02-2016, 01:29 PM

9. 
   steven liked post by ebf On thread : Annealing questions

   Hamish, extended brass life is a side-benefit for me. The primary reason I do it is to get consistent neck tension. But I shoot a LOT and get thru my brass reasonably quickly. After about 4-5 firings...

   Liked On: 01-02-2016, 03:39 PM

10. 
    steven liked post by Beavis On thread : Ar15's with heavy projectiles

    You can seat them just fine. I have shot both 68 a and 75 gr bthp accurate with good speed.

    Liked On: 28-01-2016, 03:39 PM

11. 
    steven liked post by P38 On thread : Annealing questions

    Dead is better Good work that man :thumbsup: Cheers Pete

    Liked On: 27-01-2016, 07:25 AM

12. 
    steven liked post by Dead is better On thread : Annealing questions

    I'm only proud of the fact it works. An honest mate told me it looked 'agricultural' haha. Its for a 6.5x55 but I don't see why it would matter what cal as the wall thickness would determine the time...

    Liked On: 27-01-2016, 07:25 AM

13. 
    steven liked post by Coozer On thread : opinions on lee anniversary reload kits?

    Llewelyn I've had a Lee kit for over 20 years. And I reload for the 7mm 08. Bottom line - whilst its cheap, it goes bang every time and seems to produce pretty accurate and consistent rounds. ...

    Liked On: 25-01-2016, 08:47 AM

14. 
    steven liked post by nzvermin On thread : Casual range in wellington?

    Try the Upper Hutt deer stalkers. Its only $100 ish a year and you can use the range anytime it isnt booked.

    Liked On: 25-01-2016, 08:45 AM

15. 
    steven liked post by zimmer On thread : New ADI factory & powders

    Don't panic, they are not going to cease their top sellers. Look at the popularity of Varget and H4895 in the States. More likely fine tuning of the current recipes and new recipe introductions which...

    Liked On: 22-01-2016, 01:10 PM

Page 10 of 103 First 12345678910111213141516171819202122232460 ... Last

• Jump to page: