Went through my photobucket account and found a few pics, just none of the stag I shot. I'll have to see what happens next time I take the rifle out. The mauser...
Liked On: 05-07-2016, 07:42 PM
They are bloody good when fishing in 400+m off Kaikoura. I used the ones that were advertised in the H&F catalogue a while back. Can't remember the name sorry. They were on the fishing boat the guy...
Liked On: 04-07-2016, 03:17 PM
Make one of these!!! https://www.youtube.com/watch?v=bKHz7wOjb9w
Liked On: 04-07-2016, 01:24 PM
Probably not. There was a good article in NZHunter a while back by a guy using 338 federal with sub loads. He ended up using Lehigh subsonic projectiles. Pretty pricy, but they do expand at sub...
Liked On: 02-07-2016, 09:30 PM
Model 7 magnums are a really good combination of size, weight and hitting power.
Liked On: 30-06-2016, 08:18 PM
Model 7 magnums are a really good combination of size, weight and hitting power.
Liked On: 30-06-2016, 07:11 PM
Model 7 magnums are a really good combination of size, weight and hitting power.
Liked On: 30-06-2016, 06:55 PM
Welcome, just don't mention Waikato beer or 270's and you will get along fine.:thumbsup:
Liked On: 29-06-2016, 03:53 PM
Welcome, just don't mention Waikato beer or 270's and you will get along fine.:thumbsup:
Liked On: 29-06-2016, 03:46 PM
Nothing wrong with my barrel, will shoot 0.5MOA when I do my part. But I'm using Nosler custom brass and only using 65gr 2217 for 2816 fps. Went up to 67 but didn't increase enough to be worthwhile....
Liked On: 27-06-2016, 03:47 PM
Kaikoura. Arthur's pass. Sounds.
Liked On: 24-06-2016, 10:43 PM
+1 for 72 gr 2217
Liked On: 24-06-2016, 03:06 PM
Kaikoura. Arthur's pass. Sounds.
Liked On: 22-06-2016, 11:25 PM
The Rural Women in NZ is asupportive submission http://www.parliament.nz/resource/en-nz/51SCLO_EVI_00DBSCH_INQ_68642_1_A516815/0d7142c5c9bcb012a1bc0aefd30df0bb3caa6a4a
Liked On: 21-06-2016, 07:41 PM
Tikka7mm08 7SAUM and 162 a- max base to tip projectile 2.934"/74.52mm base to ogive 2.232"/56.59"
Liked On: 21-06-2016, 07:31 PM