Correct, in Ashburton. Get into it before we sell out ;)
Liked On: 22-07-2025, 10:23 PM
Gidday folks on behalf. Photo explains it all but all are welcome.279224
Liked On: 21-07-2025, 10:20 PM
No Shiver N Shoot this year, myself and a few of the other people who help run the matches at Invers are getting ready for worlds
Liked On: 27-06-2025, 11:12 AM
Of course there will be Ammunition Restrictions and it has nothing to do with Safety. The FSA is a Bureaucracy and the No1 aim for Bureaucrats is to keep themselves in a job. So more...
Liked On: 17-06-2025, 09:43 AM
Try delta Mike for parts or workshop innovation. Otherwise just buy from Dillon direct in the us, they are great to deal with.
Liked On: 15-09-2024, 08:26 PM
Yup, recently gave a 1990s Dillon Square Deal a birthday. Wrote to Dillon re original parts lifetime warranty plus some past useby parts and a couple of weeks later got a care-pack from the couriers...
Liked On: 15-09-2024, 08:25 PM
This year's online shooting school will focus on windcalls. I had to take the long way in, layer the info and also show contrast/non-example/poor form in order to adress novice and experienced...
Liked On: 24-06-2024, 08:59 AM
This one should be relevant, how to get consistency with lightweight rifles. Who wants to lug around a heavy smokepole??? https://www.youtube.com/watch?v=MKCViW-lfus
Liked On: 04-06-2024, 12:57 PM
251412 Changed the front mount, got a zero then shot this group at 300y. Luckily the scope wasnt bent. Thanks for the help everyone simple fix
Liked On: 31-05-2024, 07:17 AM
The G&G JJ223BF scale support is on the way. 250289 250290
Liked On: 20-05-2024, 07:14 AM
I had one for a couple of years,went everywhere I needed it to. Hunted all over the North Island in it,might have even gotten a shag or two in it. Have had a couple of Dodge Rams,can't remember...
Liked On: 09-05-2024, 08:37 AM
Righto, with the proviso that opinions are like bumholes here goes. Step one, ignore the scope completely. Set up the stock for your arms and body and get the LOP right for what you need to be...
Liked On: 08-05-2024, 09:02 PM
Hi All 249795 I'd like to share the project OpenTrickler that I've been working on for the last 3 years. The OpenTrickler adopted the AutoTrickler V4 design with following improvements: -...
Liked On: 08-05-2024, 08:57 AM
Finally got round to hanging up some of my edged things. https://uploads.tapatalk-cdn.com/20231019/5c166bac3065ac75cb3646d0b5d8ac6b.jpg Some of my favourite knives, all for different purposes. The...
Liked On: 23-10-2023, 12:55 AM
https://www.nzhuntingandshooting.co.nz/f13/cz-sp01-shadow-92282/
Liked On: 23-09-2023, 08:33 PM