I said in my presentation I'm knifemakers in France here are some achievements. a small old west in stag and warthog 24005 a other old west forge in SFF3 stag handle 23999 intégral forge in...
Liked On: 07-05-2014, 08:54 PM
Its been a slow roar for me, with a trip to the Upper Caples with Josh C and 2 other guys at the start of April and some local stuff here and there i havent seen any stags that i wanted to shoot, the...
Liked On: 19-04-2014, 11:37 PM
It is so very sad to see these ancient magnificent animals slowly dissapearing I just wanted to do my small bit towards helping conserve them. extinction is forever
Liked On: 18-04-2014, 09:31 AM
The weather was for clear skies and favorable winds after some heavy rain which was going to make my hunt all that much easier given how dry the bush has been in most areas. I was hoping to hear my...
Liked On: 14-04-2014, 08:25 PM
Faaaark Tahr, thats a piece of art mate!!!!!!
Liked On: 14-04-2014, 01:53 PM
http://i943.photobucket.com/albums/ad271/harronek/fbff28d816efde026362bbbf7a5462c6_zps83d9a847.jpg...
Liked On: 14-04-2014, 01:52 PM
My good mate and myself built a bench on his farm in 45mins with what was lying around pretty much. we have gongs at 150yds/200/300/350/400 yds that can all be shot from this bench, next time we are...
Liked On: 14-04-2014, 01:36 PM
I just got back from 6 nights of chasing Sika at the Rangatikei Bivi in the Kaimanawa Ranges. I'd never really been on a proper deer hunt with anyone experienced so I was diving in the deep end a...
Liked On: 13-04-2014, 10:10 PM
Not mine ... A mate shot this one on sat 22726
Liked On: 12-04-2014, 11:08 PM
22747
Liked On: 11-04-2014, 04:02 PM
After guiding all last week I couldn't help the urge to get out chasing deer for myself so I took out my GSP pup to one of my fallow spots today. After hunting for a few hours I found this fallow...
Liked On: 07-04-2014, 08:38 PM
Myself and Philipo headed up to my neck of the woods for a fly camp to see if there was anything going on, weather was a bit of a fizzer up in the high water heads but no roars were heard even if...
Liked On: 06-04-2014, 11:15 AM
Big thing is to not over lube it. Just a drop of oil or very light spray of silicon lube on top of the bolt. Too much just makes the action bind up with the blow back powder.
Liked On: 05-04-2014, 09:29 PM
Yes. I pull out the trigger group which is only 2 pins then slide the action out brake clean everything then go over it again with power lube and put it back together
Liked On: 05-04-2014, 09:29 PM
You don't need to clean the bore, it's a .22. Just squirt some oil in the action occasionally and when it gets real filthy and gummed up with carbon, spray it out with something like aerosol contact...
Liked On: 05-04-2014, 09:29 PM