takbok
Member

1165 Likes

Page 70 of 78 First ... 205657585960616263646566676869707172737475767778 Last

• Jump to page:

1. 
   takbok liked post by homebrew.357 On thread : Blank barrel

   At the back of the lathe is the setup for rifling register of the six groves, a bracket with a arm is bolted in place and the arm has a pin that locates and locks in a round disc with the evenly...

   Liked On: 25-09-2018, 06:02 AM

2. 
   takbok liked post by homebrew.357 On thread : Blank barrel

   You know I`ll have to agree with you, I`m slowly improving my system and thought the fast twist would cause problems ,but no and I`ll have to say this is the best barrel I have done. I`m very tempted...

   Liked On: 25-09-2018, 06:02 AM

3. 
   takbok liked post by Max Headroom On thread : How do you judge range?

   That's my strategy for now, till I spend some serious time at the range.

   Liked On: 22-09-2018, 10:11 PM

4. 
   takbok liked post by Max Headroom On thread : How do you judge range?

   Or does he...95541

   Liked On: 22-09-2018, 10:10 PM

5. 
   takbok liked post by Kiwi Greg On thread : Tried to melt the 7-08

   We decided to go for a drive late this arvo to look at a couple of spots, went down a road we hadn't been before to see where it went & to kill some time. Long story short came around a corner to...

   Liked On: 22-09-2018, 10:09 PM

6. 
   takbok liked post by viper On thread : DPT SUPPRESSOR

   I have never been a fan of the DPT suppressors. I don't really even know why but I think the idea of pulling them apart for cleaning pisses me off. Other brands you just screw on and screw off and...

   Liked On: 22-09-2018, 09:26 PM

7. 
   takbok liked post by Tommy On thread : Blank barrel

   Aren't vehicle axles made of similar steel? Reckon they might be useful to practise on? I chuck a few away

   Liked On: 22-09-2018, 09:13 PM

8. 
   takbok liked post by homebrew.357 On thread : Blank barrel

   I know this is getting boring but have just bored out a .443" hole in my last bit of 4140 steel shaft and rifling it to a 1-18" twist, it`s a hard job but some one has to do it. ;). It will be 27"...

   Liked On: 22-09-2018, 10:06 AM

9. 
   takbok liked post by Nga On thread : Kimber Adirondack review .308

   Interesting how things wander when a calibre is mentioned, if it kills your intended game humanly and is used within a realistic range for that calibre then who gives a fuck, the whole mine is better...

   Liked On: 22-09-2018, 07:03 AM

10. 
    takbok liked post by Nga On thread : Kimber Adirondack review .308

    Most of the reviews on this rifle are crap and hard to find, this will be just as crap and short as the others but at least it's for this forum ;) The skinny..... Barrel is 1 in 12 right hand...

    Liked On: 22-09-2018, 07:00 AM

11. 
    takbok liked post by Kiwi Greg On thread : 22 Terminator 1-7 Twist

    Just got the new 22 Terminator going with a 1-7 twist TF UM barrel. http://i1004.photobucket.com/albums/af161/Kiwi-Greg/22Terminator021_zps3fe40499.jpg...

    Liked On: 20-09-2018, 09:10 AM

12. 
    takbok liked post by grunzter On thread : New Defence Force rifles need firing pins replaced

    they are cool, I've got one! 95391

    Liked On: 20-09-2018, 09:08 AM

13. 
    takbok liked post by Tahr On thread : Sierras new Game changer bullets

    Holding their weight, expanding at ordinary long rang ranges and punching right through sounds the ticket for me - especially if they are cheaper than Barnes TTSX and not as fiddly to get to shoot.

    Liked On: 19-09-2018, 06:09 PM

14. 
    takbok liked post by Tahr On thread : Sierras new Game changer bullets

    I doubt they are any tougher than the Barnes TTSX and they work well for me.

    Liked On: 19-09-2018, 07:31 AM

15. 
    takbok liked post by bigred On thread : Couple more for the freezer. By mistake.

    Works been flat stick recently and coming into race season for us the next few months for me means pretty much 7 day weeks. It sucks on the limited hunting time but I do enjoy it so can't complain...

    Liked On: 17-09-2018, 09:00 AM

Page 70 of 78 First ... 205657585960616263646566676869707172737475767778 Last

• Jump to page: