I have one of the heavy barrel 10/22 jobbies - a later one with a hammer forged barrel. It sits in a pillar bedded Magpul x22 stock and I've run a lot of different sorts of target ammo through it...
Liked On: 01-01-2021, 09:34 PM
If it is indeed the "same" as PP 2000-MR then its a bit slow for 130's in the 308 and GRT predicts your'll only be burning about 85% of the powder - won't cause any problems just a great big muzzle...
Liked On: 31-12-2020, 01:01 PM
Other peoples experiences will be different but none of mine shot real well and it was always a "fight" to get "advertised" velocities. The last one I went all out and used a Kreiger cut rifled...
Liked On: 30-12-2020, 08:37 AM
you could just get a 270, which is better than either (I'll now go to the naughty corner . . . . )
Liked On: 30-12-2020, 08:05 AM
you could just get a 270, which is better than either (I'll now go to the naughty corner . . . . )
Liked On: 29-12-2020, 10:33 PM
you could just get a 270, which is better than either (I'll now go to the naughty corner . . . . )
Liked On: 29-12-2020, 09:09 PM
you could just get a 270, which is better than either (I'll now go to the naughty corner . . . . )
Liked On: 29-12-2020, 09:09 PM
I have got 6.5-06 dies of you want some, I've had 3 of them and wouldn't bother with one again.
Liked On: 29-12-2020, 09:08 PM
Other peoples experiences will be different but none of mine shot real well and it was always a "fight" to get "advertised" velocities. The last one I went all out and used a Kreiger cut rifled...
Liked On: 29-12-2020, 09:06 PM
I have got 6.5-06 dies of you want some, I've had 3 of them and wouldn't bother with one again.
Liked On: 29-12-2020, 08:05 PM
you could just get a 270, which is better than either (I'll now go to the naughty corner . . . . )
Liked On: 29-12-2020, 08:05 PM
Hey Duncan viper - I just used the wee "C" knife you made me in D2 to skin and bone out a back wheels of a yearling redskin (for Kiwi-Hunter )- its going real good, and the edge is holding up just as...
Liked On: 28-12-2020, 08:01 PM
All of the above or you might just have struck what's been bugging me. I couldn't see a pattern of improvement with the 6mm CM I've been loading for. Borrowed a Concentricity guage and guess...
Liked On: 27-12-2020, 03:32 PM
Plenty of "reach" with that rig and snotty at both ends!!
Liked On: 27-12-2020, 02:31 PM
He's obviously well bred !! And bloody lucky with that eh GD!!
Liked On: 27-12-2020, 12:58 PM