Tertle
Member

238 Likes

Page 1 of 16 123456789101112131415 ... Last

• Jump to page:

1. 
   Tertle liked post by XR500 On thread : coleman fuel alternatives

   Buy the stuff from a camping store = $11-13/L Buy from Pac n Slave = $7-8/L Buy from a commercial cleaning outfit, as has been suggested = $3-4/L Its all exactly the same stuff.

   Liked On: 05-01-2024, 05:41 PM

2. 
   Tertle liked post by Micky Duck On thread : Trailer ideas

   those two holes...mount a l shaped hook with tall leg upwards t ohang bottle on....put a ring of steel...2" section of pipe slightly bigger than the one on bum of bottle at correct height so the hook...

   Liked On: 03-12-2023, 05:40 PM

3. 
   Tertle liked post by Ingrid 51 On thread : Trailer ideas

   I think it’s a great idea, possibly because I’m contemplating similar for my caravan. I suggest you get a thick-walled bike mount as some at *#§ rubbish. My purpose is for 4hp outboard motor stand.

   Liked On: 03-12-2023, 02:09 PM

4. 
   Tertle liked post by Micky Duck On thread : Stewart Island police

   by same token..hunters should expect to run into sensitive souls tramping...... we NEED to be seen to be doing our bit to keep everyone safe...when we can normalise this by doing normal things...

   Liked On: 06-05-2023, 08:57 PM

5. 
   Tertle liked post by dannyb On thread : Stewart Island police

   So the Stewart Island cop tries to do something pro active for gun safety and all of a sudden you guys are spinning it to be something negative :wtfsmilie: what happened could be interpreted in many...

   Liked On: 06-05-2023, 08:51 PM

6. 
   Tertle liked post by Marty Henry On thread : Need Help to ID an old gun case

   Here was me thinking it might be a leg of mutton or a case with a partial trade label, if that qualifies as old then I guess those are ancient.

   Liked On: 30-04-2023, 11:35 AM

7. 
   Tertle liked post by 7mmsaum On thread : Timattalon's MX5 woes

   Loctite 660 It will fix that in 60 seconds Done it plenty of times on heavy machinery equipment It’s made to bond shafts/collars to each other Very very simple inexpensive fix

   Liked On: 23-04-2023, 09:30 PM

8. 
   Tertle liked post by Grey Kiwi On thread : Timattalon's MX5 woes

   Tim...try a new key with Loctite 660. Give that crank end a good clean up first. This stuff is made for this sort of problem. If nothing else, it will save you from having to rush into a motor...

   Liked On: 23-04-2023, 09:28 PM

9. 
   Tertle liked post by m101a1 On thread : 4x4 Paint job options

   Easier to grip and push when STUCK .

   Liked On: 14-04-2023, 09:33 PM

10. 
    Tertle liked post by Barry the hunter On thread : .303 rifle recoil, sore shoulder

    ohh for crying out loud -man up - use a pad if ya half to but if ya think its going to kick - select one of two options 1) don't fire it 2 ) be brave - hold it tight - use a pad - enjoy shooting -...

    Liked On: 10-04-2023, 06:39 PM

11. 
    Tertle liked post by NZ32 On thread : Jerry Cans

    Yea, lots of the cheap Chinese ones around. They don't have a coating on the inside and are thinner steel so they rust really quickly.

    Liked On: 05-04-2023, 09:37 PM

12. 
    Tertle liked post by XR500 On thread : Jerry Cans

    Seller says "almost new" and already rusting = Chinese. Steel will also be half the thickness of a European manufactured one.

    Liked On: 05-04-2023, 09:37 PM

13. 
    Tertle liked post by NZ32 On thread : Jerry Cans

    There are cheaper one on ebay too ...

    Liked On: 04-04-2023, 01:56 PM

14. 
    Tertle liked post by Tommy On thread : drawbar coupling

    Or direct from Trojan

    Liked On: 29-03-2023, 11:07 AM

15. 
    Tertle liked post by tac a1 On thread : drawbar coupling

    If its only going to pull 900 kg that coupling is probably fine as long as it isnt rusty inside. And for your info the welding on a trailer under 2.5 ton doesn't have to be certified. It just has...

    Liked On: 27-03-2023, 05:39 PM

Page 1 of 16 123456789101112131415 ... Last

• Jump to page: