Tikka7mm08
Member

1711 Likes

Page 14 of 115 First 1234567891011121314151617181920212223242526272864114 ... Last

• Jump to page:

1. 
   Dreamer liked post by Tikka7mm08 On thread : Kimber Montana 308 Load Development

   Tried the Kimber with a H2 A-Tec QD suppressor. Shot very well. ...

   Liked On: 04-08-2022, 08:10 PM

2. 
   T.FOYE liked post by Tikka7mm08 On thread : 6.5 PRC Load Development Begins

   Going to start with the ELDX. If accurate will return the Bergers. https://uploads.tapatalk-cdn.com/20220721/65521164416e9ab6dafbcbe44f7a4f5b.jpg Sent from my SM-G998B using Tapatalk

   Liked On: 02-08-2022, 08:14 PM

3. 
   Shearer liked post by Tikka7mm08 On thread : Tikka Veil Factory Stock Weight

   Weighed the stock tonight. Lighter than I expected... not a huge saving going to a CF replacement? ...

   Liked On: 01-08-2022, 06:33 PM

4. 
   hotsoup liked post by Tikka7mm08 On thread : Fitting Mtn Gear Bipod Picatinny Rail - Must Use Gunsmith?

   https://www.instagram.com/p/CaixJqYJf7M/ Sorted.

   Liked On: 30-07-2022, 11:20 PM

5. 
   Muttonguts liked post by Tikka7mm08 On thread : Kimber Montana 308 Load Development

   Managed to bag a buck on Stewart Is. trip. The 168gn went straight through and would probably try a much lighter bullet next time. It was an unexpected 'long range' shot too at 350ish yards. ...

   Liked On: 30-07-2022, 08:53 AM

6. 
   Muttonguts liked post by Tikka7mm08 On thread : Kimber Montana 308 Load Development

   I have GREAT taste in whisky, poor taste in friends :yaeh am not durnk:

   Liked On: 30-07-2022, 08:35 AM

7. 
   Mark M liked post by Tikka7mm08 On thread : 6.5 PRC Load Development Begins

   Yes they wouldn't chamber. Yes will do thanks Danny.

   Liked On: 26-07-2022, 06:14 PM

8. 
   Moa Hunter liked post by Tikka7mm08 On thread : Seating depth headache

   Annealing brass does help. Happy to do for you.

   Liked On: 26-07-2022, 08:44 AM

9. 
   veitnamcam liked post by Tikka7mm08 On thread : 6.5 PRC Load Development Begins

   Pretty much as I thought with pressure showing at 60gn with slightly firmer bolt lift no ejector mark but both at 60.5gn so no need to shoot 61gn. Loaded 3 at 59gn in anticipation and nice SD so...

   Liked On: 24-07-2022, 10:17 PM

10. 
    veitnamcam liked post by Tikka7mm08 On thread : 6.5 PRC Load Development Begins

    Poor signal uploading pics. https://uploads.tapatalk-cdn.com/20220722/d2560dcda895125a5c6891c401f6e3c2.jpg Sent from my SM-G998B using Tapatalk

    Liked On: 24-07-2022, 10:15 PM

11. 
    veitnamcam liked post by Tikka7mm08 On thread : 6.5 PRC Load Development Begins

    Very please with first rounds and reconnecting with that Tikka goodness. Lovely rifle to shoot. First shot 53gn off to right after bore sighting. Adjusted scope to left and then shot 54, 55, 56,...

    Liked On: 24-07-2022, 10:11 PM

12. 
    Kelton liked post by Tikka7mm08 On thread : 6.5 PRC Load Development Begins

    Yep. Got plenty of RE26 still and have a load sorted.

    Liked On: 24-07-2022, 06:26 PM

13. 
    dannyb liked post by Tikka7mm08 On thread : 6.5 PRC Load Development Begins

    Yep. Got plenty of RE26 still and have a load sorted.

    Liked On: 24-07-2022, 05:52 PM

14. 
    Link liked post by Tikka7mm08 On thread : 6.5 PRC Load Development Begins

    Annealing makes a difference - it will help a pretty good load but it won't fix a bad one if you know what I mean. It takes about 5-10min I guess to put 100ish through the annealer so is the fastest...

    Liked On: 24-07-2022, 10:51 AM

15. 
    Bill999 liked post by Tikka7mm08 On thread : 6.5 PRC Load Development Begins

    Very please with first rounds and reconnecting with that Tikka goodness. Lovely rifle to shoot. First shot 53gn off to right after bore sighting. Adjusted scope to left and then shot 54, 55, 56,...

    Liked On: 23-07-2022, 11:14 PM

Page 14 of 115 First 1234567891011121314151617181920212223242526272864114 ... Last

• Jump to page: