Tikka7mm08
Member

1716 Likes

Page 4 of 115 First 12345678910111213141516171854104 ... Last

• Jump to page:

1. 
   Tikka7mm08 liked post by 6.5 CRD On thread : Tin Arse Load Development 6.5 PRC

   Couldnt help myself, Loaded some more & did a seating depth ladder. Just shy of 3000fps & great SD. Awesome :D 219580

   Liked On: 05-04-2023, 09:16 AM

2. 
   Tikka7mm08 liked post by 6.5 CRD On thread : Tin Arse Load Development 6.5 PRC

   My wife just purchased a new Tikka 6.5 PRC 24" to replace her Browning 6.5 PRC 26" she just sold. I loaded up a ladder taking a guesstimate based on what worked in the browning hoping it would be...

   Liked On: 05-04-2023, 09:16 AM

3. 
   Tikka7mm08 liked post by Stag On thread : Camp fire cook plates and grills

   Nathan F will need a good setup for May. Pressure is on

   Liked On: 20-03-2023, 12:02 AM

4. 
   Tikka7mm08 liked post by stagstalker On thread : 6.5 143 ELD-X, are they THE 6.5 hunting bullet?

   I use berger classic hunters in my 260 but I would suggest you use the eldx and leave the bergers for me :thumbsup:

   Liked On: 14-03-2023, 08:02 PM

5. 
   Tikka7mm08 liked post by Rated M for Magnum On thread : 6.5 143 ELD-X, are they THE 6.5 hunting bullet?

   Great feedback team. Well they shoot pretty well in my rifle so I think I'll stick with them. 218785 Knocking on 2900 with almost 100 rounds down the tube so should speed up a little yet.

   Liked On: 14-03-2023, 08:01 PM

6. 
   Tikka7mm08 liked post by DBD On thread : 6.5 143 ELD-X, are they THE 6.5 hunting bullet?

   A cracker day to get out and verify some load data. The 10" mild steel gong (8mm plate) was set at 550yrds, tikka6.5 using 6.5 Creedmoor with 142LRAB and myself with 143eldx in PRC. The impact...

   Liked On: 12-03-2023, 07:26 PM

7. 
   Tikka7mm08 liked post by Stag On thread : 6.5 PRC Load Development Begins

   Will have to find something other than paper now… Tac driver

   Liked On: 04-03-2023, 11:17 AM

8. 
   Tikka7mm08 liked post by Mathias On thread : Moly for barrel?

   Great advise here ^^^ Auto Sol is a better choice than JB in my opinion. Just don't come out past the muzzle end if using a cloth wrapped around a smaller brush, rumours are that it could wear the...

   Liked On: 04-03-2023, 11:15 AM

9. 
   Tikka7mm08 liked post by Gerardo On thread : Moly for barrel?

   Ive got a moly tumbler and some moly if you want to try it mate. Increase load by 0.2gr. But people say it can trap moisture. I never had a problem with this, and accuracy never changed. ...

   Liked On: 04-03-2023, 11:15 AM

10. 
    Tikka7mm08 liked post by shooternz On thread : Moly for barrel?

    No problem Sweets shifts copper better than most more expensive solutions, just don't leave it in the barrel for very long, Use a Nylon bristle brrush Sweets eats Bronze brushes and gives a false...

    Liked On: 03-03-2023, 11:59 AM

11. 
    Tikka7mm08 liked post by PipIstrelle On thread : Moly for barrel?

    I can't give you more than I've read and watched regarding its use . Apparently , it's available as an aerosol which can be sprayed down the barrel and a powder which is applied to the bullets by...

    Liked On: 03-03-2023, 09:41 AM

12. 
    Tikka7mm08 liked post by PipIstrelle On thread : Moly for barrel?

    What about using hBN to dress both bullets and barrel , I bought some and never used it . Using hBN , allegedly improved extreme spread and extra velocity could be achieved . Unfortunately , the...

    Liked On: 03-03-2023, 09:32 AM

13. 
    Tikka7mm08 liked post by stug On thread : Moly for barrel?

    My trueflite 7mm mag barrel copper fouled like crazy, after a few hundred rounds it had settled down.

    Liked On: 03-03-2023, 09:24 AM

14. 
    Tikka7mm08 liked post by Ponchorello On thread : Wear on Earth

    I went to their factory today and very impressed. Great range. Basically make anything you want from ultralight to very heavy duty. Quality components. About 2 weeks to make it at present. Worth...

    Liked On: 01-03-2023, 10:38 PM

15. 
    Tikka7mm08 liked post by Gerardo On thread : 6.5 PRC Load Development Begins

    Very nice. Sent from my SM-G975F using Tapatalk

    Liked On: 01-03-2023, 10:36 PM

Page 4 of 115 First 12345678910111213141516171854104 ... Last

• Jump to page: