tnankie
Member

4 Likes

1. 
   tnankie liked post by zimmer On thread : bullet and case comparators

   Look at the Hornady set. They list the datums. You can also gey the datum off the SAAMI drawings. No trouble making them. Made one for an odd ball case myself. Measured the diameter at neck plus...

   Liked On: 31-07-2023, 02:43 PM

2. 
   tnankie liked post by Flyblown On thread : Cartridge suggestions

   Yup, a .300 magnum, the .300 WSM is my pick. You need to revise your minimum impact velocity up from 2000 to 2400fps. Copper bullets are notoriously fickle when it comes to sufficient...

   Liked On: 11-11-2021, 05:29 PM

3. 
   tnankie liked post by shooternz On thread : Cartridge suggestions

   Take a look at the 7x64 / 280 Rem 30/06 like the .308 case based cartridges on steroids with out the recoil , My pick would be the 7x64 with Norma ammo if factory is what you will be shooting most.

   Liked On: 11-11-2021, 05:29 PM

4. 
   tnankie liked post by tikka On thread : Cartridge suggestions

   Welcome to the forum. I would think a 300wsm would be the ticket for big sambar, the first 200 rounds would be expensive if buying factory ammo and save your brass for reloading if you go that...

   Liked On: 11-11-2021, 05:28 PM