Try putting a half inch socket over the case. Change the Phillips head screw for a bolt with some fat washers between the bolt head and the socket and tighten with a spanner. Clearly there was not...
Liked On: 02-03-2021, 07:20 PM
If you want to run this again, our range is open for hire. $50 per person. Includes a range master and targets up to 2000m. Get in touch for possible dates. Camping on site available. Sparrowhawknz.
Liked On: 28-02-2021, 12:35 PM
As a teenager I worked as a fitter & turner for a hydraulics manufacturer. We made the full range of products including snap couplings. We had a test rig that the finished couplings were put on and...
Liked On: 22-02-2021, 08:23 PM
Yeah, air is cool as. Black Powder Matters
Liked On: 22-02-2021, 08:23 PM
But in reality I am keen to build something in V-Can caliber.
Liked On: 22-02-2021, 08:22 PM
I should have mentioned that it was a proof load, the projectile was 1" of 1/4" Whit bolt wrapped in a a layer of toilet paper and the full Ballistite charges from 2x .303 blanks. Instead of running...
Liked On: 22-02-2021, 08:21 PM
That gun shoots at the deerstalkers range, on Antique arms cannon days. Anyone interested in Black powder or cannon, Gimmie a PM.
Liked On: 22-02-2021, 08:21 PM
^^^ Since we're going down that path . . . Anti-tank live firing with 105mm M101 Howitzers - a decent size shell (28 lbs rings a bell) at 2800 fps with a tracer in the base. The only time we...
Liked On: 21-02-2021, 08:19 PM
So we ended up just shooting standard steel gongs during the day. Also got 2 deer, 50 wallabies, a headgehog, 80 odd bunnies and 2 magpies got hit with a .308 and .270 Bloody good couple days...
Liked On: 21-02-2021, 05:44 PM
22-204 Sent from my iPad using Tapatalk
Liked On: 21-02-2021, 05:20 PM
if it runs with those wires unplugged they might be for a rpm gauge
Liked On: 21-02-2021, 12:00 PM
Sounds like the fuel shut solenoid is sticking for the running on problem. Check the fuel primer on the filter, if you prime it up firm and it starts first pop you may have a leaking diaphragm...
Liked On: 21-02-2021, 11:56 AM
Belmont is struggling to get reloading components. FWIW, my 1:9 twist Howa shot their 55 gr thru one ragged hole at 100m, but did not like the 62 gr so much. At 300m the 55 gr was very wind...
Liked On: 14-02-2021, 05:57 PM
Lots of guys all over the world have gotten very cranky about the flexible forend on the original Hogue stocks. So they go about pouring all sorts of resins into the polymer frame and adding metal...
Liked On: 14-02-2021, 05:55 PM
The private farm im walking alongside/past is the property i have acess too
Liked On: 14-02-2021, 05:53 PM