Tommy
Member

4964 Likes

Page 55 of 331 First ... 54142434445464748495051525354555657585960616263646566676869105155 ... Last

• Jump to page:

1. 
   Tommy liked post by Wirehunt On thread : Shotgun on Goats

   I'd be more inclined to get a hold of a couple of departments and tell them it's now their.problem. MPI, Regional council And that flowery one mobandfuckidry

   Liked On: 21-07-2019, 11:13 AM

2. 
   Tommy liked post by yerimaginaryM8 On thread : Beams scales vs automatic powder dispencers

   I've had both a target master and a chargemaster. Ran the chargemaster and the target master side by side a few times and sold the target master. Just found it a bit clunky to set up and the fine...

   Liked On: 20-07-2019, 09:16 PM

3. 
   Tommy liked post by R93 On thread : Priming Problems

   It would literally take minutes to fix with a needle file and some sandpaper. It will be as good as new. It is a machine mark from I would suggest a parting tool. It could take weeks to get...

   Liked On: 20-07-2019, 07:17 PM

4. 
   Tommy liked post by Ryan_Songhurst On thread : Tyvek for ground sheet.

   Dozen beers and cruise round a subdivision at lunch time

   Liked On: 20-07-2019, 06:00 PM

5. 
   Tommy liked post by kidmac42 On thread : Tyvek for ground sheet.

   On a Friday.

   Liked On: 20-07-2019, 06:00 PM

6. 
   Tommy liked post by R93 On thread : Priming Problems

   Why not just take the high point off the plunger with a file or some sandpaper? May save a few hassles with time on a replacement etc. Sent from my SM-G965F using Tapatalk

   Liked On: 20-07-2019, 04:48 PM

7. 
   Tommy liked post by Gibo On thread : What's up with my scale.

   Ratshit.

   Liked On: 19-07-2019, 10:33 PM

8. 
   Tommy liked post by johnd On thread : Shortening Annie 1416-1416

   I would talk with someone that has been doing small bore for a few years, they probably know a lot about which Annie has what barrel wise and will know what effect shortening has on accuracy too....

   Liked On: 18-07-2019, 08:15 PM

9. 
   Tommy liked post by 40mm On thread : What's up with my scale.

   Also the instructions will detail the procedure to remove any static charge. Failing that and the above advice, you should give it a few sharp smacks with a piece of firewood.

   Liked On: 18-07-2019, 08:10 PM

10. 
    Tommy liked post by FRST On thread : South Africa near Botswana border with Dave Freeburn Safaris

    Dave’s 500 Nitro Express Verney Carron Double. Beautifully put together and a real step up from the usual Krieghoff and Merkel doubles. Dave regularly carried it depending where we were as the Buff...

    Liked On: 16-07-2019, 06:44 PM

11. 
    Tommy liked post by ebf On thread : South Africa near Botswana border with Dave Freeburn Safaris

    Nice ! Warthog is some of the tastiest meat you will ever eat. For my 40th we drove to Unions End - the part of the Kgalagadi park where South Africa, Botswana and Namibia meet.

    Liked On: 16-07-2019, 06:43 PM

12. 
    Tommy liked post by gundoc On thread : Cycling Issues - Suggestions from the learned among you.

    The Benelli and other inertia operated semi-auto shotguns all give unreliable performance with light trap loads. The easiest solution is to just use 32 gram (1-1/8 ounce) loads. They are also very...

    Liked On: 15-07-2019, 08:44 PM

13. 
    Tommy liked post by mikee On thread : Cycling Issues - Suggestions from the learned among you.

    run a slab or 2 of heavy loads thru it and try the trap loads again

    Liked On: 15-07-2019, 08:43 PM

14. 
    Tommy liked post by Rushy On thread : Aging Salami

    I am the goods as well Tommy so I can understand your confusion.

    Liked On: 13-07-2019, 06:55 PM

15. 
    Tommy liked post by bully On thread : Apologies to the forum and moderators

    Drop a box off then we will be good.

    Liked On: 13-07-2019, 03:36 PM

Page 55 of 331 First ... 54142434445464748495051525354555657585960616263646566676869105155 ... Last

• Jump to page: