You need a Mercator knife, a sharpening stone and steel and a 35l ish pack and some basic on sale merino Macpac layers. Forget about the super expensive and ridiculously heavy hunting coats. It’s...
Liked On: 10-01-2021, 09:10 PM
You need a Mercator knife, a sharpening stone and steel and a 35l ish pack and some basic on sale merino Macpac layers. Forget about the super expensive and ridiculously heavy hunting coats. It’s...
Liked On: 10-01-2021, 10:01 AM
You could throw my rifle down a cliff and my 13 year old MK4 would still retain it's 0 It's great in low light, is very easy on the eye to sit behind for a long period of time and is fairly light...
Liked On: 17-12-2020, 10:45 PM
You could throw my rifle down a cliff and my 13 year old MK4 would still retain it's 0 It's great in low light, is very easy on the eye to sit behind for a long period of time and is fairly light...
Liked On: 17-12-2020, 08:12 PM
You could throw my rifle down a cliff and my 13 year old MK4 would still retain it's 0 It's great in low light, is very easy on the eye to sit behind for a long period of time and is fairly light...
Liked On: 17-12-2020, 01:26 PM
You could throw my rifle down a cliff and my 13 year old MK4 would still retain it's 0 It's great in low light, is very easy on the eye to sit behind for a long period of time and is fairly light...
Liked On: 17-12-2020, 11:37 AM
With 90% of modern boat tail projectiles a pretty much perfect drop chart is calculated with just these 4 things. 1. Confirm if the scope actually tracks correctly by clicking against a grid at...
Liked On: 15-12-2020, 09:17 AM
I think at the end of they day there are shitloads of different ways to get a knife sharp enough to deal to a meat animal. You can hone, grind, stone, steel, diamond and strop. Pick any of these,...
Liked On: 25-09-2020, 11:59 PM
I only purchase quality knives that are capable of taking and holding a SHARP edge and my way of thinking was SHARP was the only way to go.. After effortlessly slicing off the tip of my finger...
Liked On: 25-09-2020, 09:53 PM
Yep. If you drill through the front facing shoulder they do the same at 600y too.
Liked On: 25-09-2020, 06:15 PM
Nah, sometimes we shoot across three or four valleys just to spice things up.
Liked On: 11-09-2020, 04:16 PM
I get a bit of run out on my Forster and Redding FL dies but the shots all go through the same hole. I get less run out with my Lyman M die but these dies are old school and often create...
Liked On: 07-08-2020, 09:15 PM
To answer your question You can do your load development with the break fitted so you can fire decent strings of shots without the mirage bothering you. When you're happy, clean your rifle,...
Liked On: 07-06-2020, 08:59 AM
My guess has been that the marks are because the air in the barrel and suppressor in front of the bullet can’t escape as quickly as it can when using no suppression or a muzzle break. Are you...
Liked On: 05-03-2019, 05:57 AM
The weight of the suppressor typically has an effect barrel harmonics hence the POI shift. Similar to how a bench rest barrel tuner works. There are some light weight barrel tuners available these...
Liked On: 01-08-2018, 09:21 PM