Tuidog
Member

249 Likes

Page 6 of 17 First 1234567891011121314151617 Last

• Jump to page:

1. 
   Tuidog liked post by veitnamcam On thread : 223 build - or "how I got up-sold"

   Better spent on a nice gun than a not nice woman.

   Liked On: 14-01-2021, 06:11 PM

2. 
   Tuidog liked post by MMC3 On thread : Trying something, Eric Cortina method of load development

   This time the summary is two words: pleasantly surprised. Given the first depth-seating test series indicated a narrow node within the range and strong hints of a node at the end (longest...

   Liked On: 13-01-2021, 06:38 PM

3. 
   Tuidog liked post by PaulNZ On thread : Walnut Stock Build

   Slowly :). I did the final duplication down to 1.5mm oversize a few months ago, then it got bumped down the project list a few steps. There's been a woodworking centre to strip and rebuild, and the...

   Liked On: 04-01-2021, 07:37 PM

4. 
   Tuidog liked post by mopheadrob On thread : What do you write on drop chart?

   I've got a slightly different way of looking at it. For me, deer don't tend to stand at convenient distances away, so range increments are arbitrary. I've set mine up per half MOA / 2 clicks, and...

   Liked On: 24-12-2020, 05:37 PM

5. 
   Tuidog liked post by Pav On thread : What do you write on drop chart?

   For someone relatively new to the whole hunting scene, this is what I have found works for me so far... 156653 Admittedly I have actually only had to dial up for 1 deer out of 6 shot so far this...

   Liked On: 24-12-2020, 05:31 PM

6. 
   Tuidog liked post by outdoorlad On thread : Tikka 7mm Magnum Build

   You could try adjusting the seating depth to see if that tightens that load up.

   Liked On: 11-12-2020, 09:04 PM

7. 
   Tuidog liked post by Magnetite On thread : 2213sc in 6.5x55?

   I did some seating depth testing with 2213sc and 129gr projectiles. It looks like you will need to adjust it between 2209 and 2213sc. Initially it looks like 2213sc noticeably more accurate. I hope...

   Liked On: 18-10-2020, 12:30 AM

8. 
   Tuidog liked post by Micky Duck On thread : The ‘controversial.222’

   personally I WOULD SUGGEST 1:12----1:10 even....the trebly is great wee round..so is 223 and if you want to chuck 80grn projectiles buy a .243 ...within 150 yards the 50-55grn projectiles do good...

   Liked On: 15-10-2020, 09:54 PM

9. 
   Tuidog liked post by 6x47 On thread : Stock makers in NZ?

   Here it is prior to the chequering being done https://i.vgy.me/S4Ffvq.jpg

   Liked On: 15-10-2020, 10:57 AM

10. 
    Tuidog liked post by BSA270 On thread : The ‘controversial.222’

    Have still got a real mint BSA Hunter .222 all original. Shot many Fallow and reds back when meat shooting with BRNO Fox .222 with twin triggers. Very accurate. Did the job provided I did my part...

    Liked On: 12-10-2020, 10:53 PM

11. 
    Tuidog liked post by shooternz On thread : 2213sc in 6.5x55?

    I use 2213sc in an F class rifle 30" barrel with Lapua 139 match bullets velocity was 2927fps in my Sako 75 velocity 2560fps with 46.6 grains with much better accuracy than 2209 it is not maximin...

    Liked On: 11-10-2020, 01:32 PM

12. 
    Tuidog liked post by Magnetite On thread : 2213sc in 6.5x55?

    I did a comparison of 2209 and 2213sc with 129gr bullets. It may be of interest to you: https://www.nzhuntingandshooting.co.nz/f10/6-5x55-se-sanity-check-61340/index2.html#post1062511

    Liked On: 10-10-2020, 05:36 PM

13. 
    Tuidog liked post by Timmay On thread : 2213sc in 6.5x55?

    ah yeah, thats showing a 16.5" with 22" about 2750 (this will change depending on what 140gr you use.)

    Liked On: 10-10-2020, 02:02 PM

14. 
    Tuidog liked post by Timmay On thread : 2213sc in 6.5x55?

    A quick and dirty calculation suggests it could work 151037

    Liked On: 10-10-2020, 01:02 PM

15. 
    Tuidog liked post by grandpamac On thread : Mil-Dot reticle help pls clever fellas

    Greetings All, Probably a good time to remind everyone that a mil and a milliradian (mrad) are two different units. Our American cousins routinely get the two scrambled. A mrad works out to 10 cm at...

    Liked On: 10-10-2020, 12:09 PM

Page 6 of 17 First 1234567891011121314151617 Last

• Jump to page: