Let me know if you need to know where to head in the Mid Burn.
Liked On: 04-11-2019, 08:28 PM
We got Dark River in the 2nd. Might hand it back as I think other plans are in the making. 3nd time entering and 3rd time getting a block.
Liked On: 04-11-2019, 07:03 PM
We got Dark River in the 2nd. Might hand it back as I think other plans are in the making. 3nd time entering and 3rd time getting a block.
Liked On: 04-11-2019, 12:07 PM
Hey, provided you are not after a 14+ inch bull, there are plenty of options for a few tahr. Will be 2 to 4 hours drive from Christchurch in most cases and some riverbed walk and possibly some...
Liked On: 04-11-2019, 09:51 AM
I've given my Model 7 a rebirth From a 260imp to 6XC in a 1:7.5 26 inch heavy barrel. PT&G detachable bottom metal with MDT steel mag. Gunworks 3 port brake. I've put the original factory...
Liked On: 18-09-2019, 10:30 AM
I have a mixture of Mil and Moa scopes. Its doesn't actually matter a single bit when it comes to having to dial something. Think of it as a number that is actually meaningless; you dial the number...
Liked On: 02-09-2019, 07:01 PM
I have a mixture of Mil and Moa scopes. Its doesn't actually matter a single bit when it comes to having to dial something. Think of it as a number that is actually meaningless; you dial the number...
Liked On: 02-09-2019, 03:05 PM
I used to gut every deer, but the past couple of years have been good to me and I haven't bothered with the whole animal unless its close to the truck. Once the freezer is full, topping up with back...
Liked On: 29-08-2019, 05:02 PM
Running N560 in my 260Imp. Pressure came up quick, but ES is around 10-12fps in every 5 shoot group.
Liked On: 11-08-2019, 09:27 AM
My 260 improved was not an Ackley. It was a 30 degree shoulder. I have fitted a 6XC barrel to my Model 7 and wiped up a few loads. Seem like it might work out OK....
Liked On: 10-08-2019, 10:41 AM
I built a 6XC with a Pre-fit barrel on a Model 7 action. 26" 1:7.5 twist. Pushing 108gn ELD-m at 3135fps without pressure signs. 3178fps shows the slightest shine from the ejector. Keen to try...
Liked On: 08-08-2019, 01:56 PM
I've given my Model 7 a rebirth From a 260imp to 6XC in a 1:7.5 26 inch heavy barrel. PT&G detachable bottom metal with MDT steel mag. Gunworks 3 port brake. I've put the original factory...
Liked On: 07-08-2019, 06:20 PM
In theory, the barrel life of the 6XC is better than the 6mm Creedmore and the complete lack of recoil is very cool. The necks are long and expected life of 2500 to 3000 rounds is a mile better than...
Liked On: 13-07-2019, 10:28 PM
The 6XC will be for shooting some matches and small game. Manliness will be restored in the way of a fast 6.5mm again or 7mm (280AI or long action 284). Currently trying a 108gn ELD-M, will try...
Liked On: 13-07-2019, 04:59 PM
I have a Model 7 that needs a rebarrel. This has been my main hunting rifle for a few years in 260imp (30degree). I never really got the best out of the case, as it was the thin factory barrel and...
Liked On: 23-06-2019, 12:42 PM