Picked up the new rifle on saturday and headed upto brads to get it all sighted in. Its build on a Pierce shadow action with a triggertech trigger and rings that all came from Cam at Alpine...
Liked On: 13-04-2024, 10:08 PM
So don't, no one is forcing you to. I just wanted to play with them, I know of at least 1 hunter here in NZ that is using them with great results. They probably are a little harder, that being the...
Liked On: 13-04-2024, 05:30 PM
This is the point I was trying to make, don’t let words confuse the issue! 247946
Liked On: 13-04-2024, 05:09 PM
The Atip copper jacket is alot thicker at the front than the eld-x. Also the alloy tip will be alot harder than the plastic to deform to push back inside the copper jacket to start expansion. It...
Liked On: 12-04-2024, 07:43 PM
Nope, just been out and sectioned it a bit more....if it's hiding a cavity then it's well hidden....i know from personal experience the 150gn eldx is an extremely good hunting bullet. 247921 ...
Liked On: 12-04-2024, 07:42 PM
Make of it what you will, I'll report back with real world results after next week. My observation is, it doesn't appear to be much different compared to a 150gn eldx (all i had to compare it to but...
Liked On: 12-04-2024, 07:40 PM
The obvious reply to this is the historic "7mm 162gr Amax", of which I thankfully still have 600.
Liked On: 12-04-2024, 07:37 PM
Ok you're all onto it. This is a collection of real 3-shot groups, fired with no sight adjustments between groups. These groups were shot at 53m with a .22LR, from a bipod/rear bag in a prone...
Liked On: 12-04-2024, 10:20 AM
On the cards next week ;)
Liked On: 11-04-2024, 10:15 PM
And that A tip just looks fucking cool Sent from my SM-S916B using Tapatalk
Liked On: 11-04-2024, 10:13 PM
First bounce or second ? :yaeh am not durnk: :D
Liked On: 11-04-2024, 09:57 PM
I shoot a 7mm prc ..... this works for me . !75 gr eld-x at 2950 ft/sec , motivated by 68 gr of 2217 or 67.9 of H1000 , any mag primer you like , COL 3.3 in ADG brass , 24 inch barrel , shoots sub...
Liked On: 11-04-2024, 08:53 AM
Approx 2700fps from my 20" prc Waiting to try the federal premium apparently they use the rl26 i think it is and is much better speed and accuracy then hornady...
Liked On: 09-04-2024, 09:22 AM
I have built a few 7PRC's now that shoot several batches of factory ammo as good or nearly as good as reloads The velocities are right up there with the shorter barrels, velocities that can't be...
Liked On: 09-04-2024, 09:21 AM
https://www.youtube.com/watch?v=WMRZUljZfv8?si=p4-Ofr05t0UydX86
Liked On: 09-04-2024, 09:13 AM