vtkomene
Member

32 Likes

Page 1 of 3 123 Last

• Jump to page:

1. 
   vtkomene liked post by charliehorse On thread : scales

   He's got some good stuff that old chap, does waffle on a bit sometimes but do enjoy some of his vidz

   Liked On: 19-05-2021, 10:32 AM

2. 
   vtkomene liked post by grandpamac On thread : scales

   Greetings Vtkomene, I have two sets of scales. My original Ohaus 5.0.5 purchased around 1970 and a RCBS Chargemaster 1500 without the dispensing stuff, purchased more recently when I thought my old...

   Liked On: 19-05-2021, 10:31 AM

3. 
   vtkomene liked post by norsk On thread : Taumarunui

   I flatted breify in London with the Daughter of the couple that owned the Taumaranui "Bin Inn" Guess what the most common stolen commodity was? Bannana Chips! So next time you go down that...

   Liked On: 28-03-2021, 09:41 PM

4. 
   vtkomene liked post by XR500 On thread : Anyone got experience with the Forza Dirt Bikes?

   There's bikes then there's bikes. What do you want out of a bike?? Answer yourself that question first before you splash out on any machinery to replace the venerable Mudbug. If you want an off road...

   Liked On: 12-03-2021, 06:31 AM

5. 
   vtkomene liked post by ishoot10s On thread : xr100 engine wtb

   vtkomene, these guys have this one that'd be more suited to a small ATV as its only 4 speed and has reverse and electric start, but they may be able to get you the more basic 2 wheeler version. Main...

   Liked On: 09-03-2021, 12:01 PM

6. 
   vtkomene liked post by MAC On thread : Big walk, nice 12 pts, big blisters

   Hi, Myself and good mate walked 8.5 hrs, for a look into new country last weekend, with the plan to hopefully get onto some stags. Setup camp in rain and clag as per expected, next few days...

   Liked On: 08-03-2021, 12:04 PM

7. 
   vtkomene liked post by Rock river arms hunter On thread : 16" 7mm08 loads

   Someone was after a load for a bushpig 7mm08? Starting from 36.0 of 2208 working up 0.5gr to 40.0 My model 7 with 160gr TMK seated to mag length did this. Flat primers but easy bolt lift and...

   Liked On: 22-10-2020, 08:18 AM

8. 
   vtkomene liked post by Liam258 On thread : Ranger , range finder $999

   I’m guessing you are talking abut the ranger rangefinding binoculars? I have no experience with them but you generally get what you pay for. You do often see the bushnell 1 mile rangefinding binos...

   Liked On: 09-10-2020, 08:49 AM

9. 
   vtkomene liked post by dogmatix On thread : Ranger , range finder $999

   The Leica 2400 R is also $1000 (although I got mine for $800 from Lacklands at the 2019 Shotshow). I know which one I would get and it isn't the Ranger.

   Liked On: 09-10-2020, 08:49 AM

10. 
    vtkomene liked post by johnd On thread : Sausages

    I do now, its taken a fair few kilo's of ok sausages but i now have a pretty consistent formula. Take notes on what you do, and write down any changes or tweaks you make. The biggest issue I have...

    Liked On: 13-06-2020, 08:16 AM

11. 
    vtkomene liked post by 6x45 On thread : 270 WSM H20 capacity for Lapua brass

    Garden path. It is Norma brass. Apologies lads. Kick my virtual ass. No wonder I spent the morning searching and came up blank Its looking like 79.8 then.

    Liked On: 31-05-2020, 08:26 PM

12. 
    vtkomene liked post by 6x45 On thread : 270 WSM H20 capacity for Lapua brass

    Gents Anyone loading for this round and happen to know what the H20 capacity is? Just running some numbers through Quickload.

    Liked On: 31-05-2020, 08:25 PM

13. 
    vtkomene liked post by Baz036 On thread : workshop innovations in hamilton , awesome !!!!!!!

    Always been the same for me - very good outfit.

    Liked On: 31-05-2020, 09:20 AM

14. 
    vtkomene liked post by stagstalker On thread : workshop innovations in hamilton , awesome !!!!!!!

    Yup been the same for me too

    Liked On: 31-05-2020, 09:20 AM

15. 
    vtkomene liked post by tetawa On thread : workshop innovations in hamilton , awesome !!!!!!!

    +1

    Liked On: 31-05-2020, 09:20 AM

Page 1 of 3 123 Last

• Jump to page: