Waimauku
Member

18 Likes

Page 1 of 2 12 Last

• Jump to page:

1. 
   6x47 liked post by Waimauku On thread : Case Neck runout with redding type s bushing die

   Was getting similar result with my type s die, 3-4 thou was common and that is neck turned and then annealed.My competition redding die was no better. Tried a redding FL die and that was more often...

   Liked On: 03-07-2023, 08:03 PM

2. 
   zimmer liked post by Waimauku On thread : Case Neck runout with redding type s bushing die

   Both my redding dies with bushings ,comp & type s were the same. I have continued with the redding fl and instead of the 3-4 thou it's now more like 1.5. Haven't looked at bushing dies since....

   Liked On: 03-07-2023, 05:57 PM

3. 
   T.FOYE liked post by Waimauku On thread : Case Neck runout with redding type s bushing die

   Was getting similar result with my type s die, 3-4 thou was common and that is neck turned and then annealed.My competition redding die was no better. Tried a redding FL die and that was more often...

   Liked On: 03-07-2023, 06:47 AM

4. 
   Puffin liked post by Waimauku On thread : Case Neck runout with redding type s bushing die

   Both my redding dies with bushings ,comp & type s were the same. I have continued with the redding fl and instead of the 3-4 thou it's now more like 1.5. Haven't looked at bushing dies since....

   Liked On: 02-07-2023, 11:01 PM

5. 
   SPEARONZ liked post by Waimauku On thread : Press option

   Meet the twins,one each for the only 2 calibres that I load for. And never change a die again.225756

   Liked On: 07-06-2023, 09:50 PM

6. 
   johnd liked post by Waimauku On thread : Press option

   Meet the twins,one each for the only 2 calibres that I load for. And never change a die again.225756

   Liked On: 04-06-2023, 08:11 PM

7. 
   30.06king liked post by Waimauku On thread : Press option

   Meet the twins,one each for the only 2 calibres that I load for. And never change a die again.225756

   Liked On: 04-06-2023, 06:21 PM

8. 
   johnd liked post by Waimauku On thread : FX 120i and auto trickler

   I have an A&D 300 and V4 as well,I can't justify the cost of the unit set up for the amount I load and shoot personally. And although I had faith in the redding balance beams accuracy, would often...

   Liked On: 19-06-2022, 11:40 AM

9. 
   Jhon liked post by Waimauku On thread : Incremental load test anomalies

   I do ladder, seating and any other tests in the hope that everything will go as expected,incremental and predictable results so that maybe some conclusions can be drawn.often there will be.some...

   Liked On: 08-06-2022, 06:32 PM

10. 
    Micky Duck liked post by Waimauku On thread : Incremental load test anomalies

    I do ladder, seating and any other tests in the hope that everything will go as expected,incremental and predictable results so that maybe some conclusions can be drawn.often there will be.some...

    Liked On: 07-06-2022, 07:56 PM

11. 
    GuyDowding liked post by Waimauku On thread : Case Neck runout with redding type s bushing die

    Was getting similar result with my type s die, 3-4 thou was common and that is neck turned and then annealed.My competition redding die was no better. Tried a redding FL die and that was more often...

    Liked On: 10-04-2022, 08:43 PM

12. 
    GuyDowding liked post by Waimauku On thread : Case Neck runout with redding type s bushing die

    I had considered whether the bushing/die tolerance was responsible,but I don't know that for a fact.The FL die and then running the cases through the expander die from my sinclair neck turner where...

    Liked On: 10-03-2022, 07:53 PM

13. 
    erniec liked post by Waimauku On thread : Shelves for reloading bench... what?

    I've got a cupboard 1.3x.5m, have managed to squeeze all the reloading gear in though needs to be organized or can get a bit tight.shelves are 150mm deep-about the size of a die box.Sure I'm not...

    Liked On: 28-06-2021, 06:42 PM

14. 
    Phil_H liked post by Waimauku On thread : Shelves for reloading bench... what?

    I've got a cupboard 1.3x.5m, have managed to squeeze all the reloading gear in though needs to be organized or can get a bit tight.shelves are 150mm deep-about the size of a die box.Sure I'm not...

    Liked On: 27-06-2021, 07:28 PM

15. 
    G.I_Joel liked post by Waimauku On thread : Shelves for reloading bench... what?

    I've got a cupboard 1.3x.5m, have managed to squeeze all the reloading gear in though needs to be organized or can get a bit tight.shelves are 150mm deep-about the size of a die box.Sure I'm not...

    Liked On: 20-06-2021, 06:16 PM

Page 1 of 2 12 Last

• Jump to page: