re-barreled a No4 MK1* for a replica 4T
Liked On: 02-08-2020, 11:01 AM
EBRG, haven't seen that for awhile.:thumbs::thumbs:
Liked On: 29-07-2020, 01:34 PM
EBRG, haven't seen that for awhile.:thumbs::thumbs:
Liked On: 28-07-2020, 11:38 AM
EBRG, haven't seen that for awhile.:thumbs::thumbs:
Liked On: 27-07-2020, 09:19 PM
Hubertus were a german manufacture very good glass.
Liked On: 27-07-2020, 05:56 PM
thompsons
Liked On: 30-05-2020, 10:09 AM
The barrels been in there for a century! You need to relieve the barrel off the action face usually in a lathe but careful use of a grinder and cut off wheel will do it. It relieves the stress off...
Liked On: 27-05-2020, 10:21 PM
The barrels been in there for a century! You need to relieve the barrel off the action face usually in a lathe but careful use of a grinder and cut off wheel will do it. It relieves the stress off...
Liked On: 27-05-2020, 10:04 PM
Tempeture is the problem. When you get to or exceed max load data tempeture of the air, chamber, barrel etc will have a direct impact on pressure i.e. high pressure + temp = higher pressure. Max load...
Liked On: 25-05-2020, 08:43 PM
Tempeture is the problem. When you get to or exceed max load data tempeture of the air, chamber, barrel etc will have a direct impact on pressure i.e. high pressure + temp = higher pressure. Max load...
Liked On: 25-05-2020, 07:28 PM
Ruger american. light synth stock, 1:8 twist 3 lug bolt and accurate.
Liked On: 21-05-2020, 02:44 PM
could also be something stuck in the chamber........
Liked On: 13-05-2020, 11:54 PM
could also be something stuck in the chamber........
Liked On: 13-05-2020, 04:35 PM
could also be something stuck in the chamber........
Liked On: 13-05-2020, 01:46 PM
could also be something stuck in the chamber........
Liked On: 13-05-2020, 09:11 AM