A redundant question obviously. Or a comment posed as a question. Take your pick. Not aimed at anyone either. The thing that has been bugging me forever it seems is what amounts to, in my...
Liked On: 11-12-2025, 07:15 PM
Another product worth a try is CRC EXOFF. https://www.crc.co.nz/crc-exoff-degreaser-parts-cleaner-5l/ Haven't used it on guns as yet but have used it on machinery that brakleen wouldn't touch and...
Liked On: 10-12-2025, 06:32 AM
Face barrel down. Soak it with kero. Leave. Use pull thru.
Liked On: 10-12-2025, 06:30 AM
Chances are you are never going to get away from a dull barrel. Unless you use some sort of abrasive to physically polish the surface then dull but functional is probably your best result
Liked On: 10-12-2025, 06:29 AM
Used brake cleaner for years, works a treat, if brake cleaner doesn't get it out bore brite almost certainly will. I use brake cleaner for carbon and bore brite for getting stubborn copper if and...
Liked On: 10-12-2025, 06:29 AM
Left is a 108ELD-M loaded to T3 mag length, right a 95gn Nosler factory 243win load. 288424
Liked On: 02-12-2025, 09:07 PM
I hand load my 1/8 243. 108 gr elm at 2.8 or 2.84" in an AI short mag (about 72mm). Only just fits. SAAMI max OAL is aprox 68.8mm. If you can load long then you don't lose powder capacity so...
Liked On: 02-12-2025, 09:07 PM
I have a 1:8 T3 243. Very happy with the way it shoots the 108 ELD-Ms. 288423
Liked On: 02-12-2025, 09:06 PM
Dealer network can definitely send ammo, as per previous reference must be in a separate package :thumbsup:
Liked On: 01-12-2025, 08:59 PM
The NZ import process is simple, just fill out the import form and wait for it to be approved. It's the export that's usually more difficult. If the retailer in the US is happy to export then it...
Liked On: 01-12-2025, 07:33 AM
Retired, time on my hands. Looking to sell all my gear
Liked On: 28-11-2025, 06:32 PM
Im spending too much time on this forum. But I'm batching in the country with no TV and these are long nights... I'm really over carting deer out of places like this (from the circled clearing to...
Liked On: 27-11-2025, 07:57 AM
I use Titegroup in 38spl and subsonic 223. Its not position sensitive so is pretty safe and reliable, just take a lot of care when loading to not double charge. In 38spl, using my own soft cast...
Liked On: 24-11-2025, 07:34 PM
I run 3 shot groups & confirm that (good) load by repeating it a couple of times, usually on different day. Very rarely have I seen a 0.5moa load turn into a +1 moa on repeat. It might be 0.7 on...
Liked On: 18-11-2025, 07:52 AM
Was going to say something similar. I have rifles where 3 shots touching or 5 shots into one ragged hole is normal, after a certain point with those rifles more bullets becomes academic as you can't...
Liked On: 18-11-2025, 07:50 AM