Problem is, I'm not getting on with my work! This is way more fun with the boys who are on school holiday. Will go and pick up the birds later. Don't want to show ourselves in the paddocks yet. ...
Liked On: 09-10-2019, 10:32 AM
Easy enough at the brownells end IF the manufacturer is registered for export and the stock is less than US$100. Just order and pay. Otherwise you will need a $250US export permit. Should hit NZ...
Liked On: 09-10-2019, 10:28 AM
Hi guys, noticed this post the other day. If its any help to you, you'll find the bullets I make perform in the same way as the Berger hunting bullets do. They will penetrate & then start to...
Liked On: 08-10-2019, 01:29 PM
We got a savage spanner , barrel wise and a few gauges at workshop at Dpt if some want their barrel change. We swap tikka barrels regularly.
Liked On: 08-10-2019, 10:33 AM
It shouldnt, most of the time you will have a different point of impact shooting with it on or shooting with it off, but every time you put it back on it should shoot the same place as every other...
Liked On: 06-10-2019, 02:10 PM
I don’t recall the make but it had grooves on it so when I epoxied it in, they stayed put. Made the hole tight and also exposed in through the back in the butt recess. The best flush cups are...
Liked On: 05-10-2019, 05:38 PM
My partners go to rifle is a 20" 7-08 Tikka now using 140 BTs at 2890 fps with DPT & super accurate right out there. I'm against cutting them shorter if you want to use them successfully further...
Liked On: 04-10-2019, 06:49 PM
Check out Stan Leenders videos on YouTube. He shoots the 212eldx from a short barrel 308 with good results. I'm planning on experimenting with these or the 208 amax
Liked On: 03-10-2019, 11:37 AM
FFS!!! you have them send it to my place here in Oregon... you use my address .... I get ... I send it.... you pay me back by deposit to my kiwi bank.... I’ve only been doing this for bloody...
Liked On: 01-10-2019, 01:24 PM
https://www.nzhuntingandshooting.co.nz/f15/tikka-synthetic-stock-shortening-35280/ Very easy to cut down a factory tikka stock. Or have you had a look at savage accufit stocks?
Liked On: 01-10-2019, 01:11 PM
Strip the magazine and shorten the legs on the follower by about 3mm - problem solved.
Liked On: 26-09-2019, 09:56 PM
There's quite a difference to the calibres your looking at so I'll give you my take on it as I use/used all three. .243 Great calibre which I've used a fair bot on both Sika & Fallow but haven't...
Liked On: 24-09-2019, 09:26 AM
The 1" rings don't come with the insert kit, you need to buy them seperately they come with +/- 5, 10 and 20moa inserts, so you can actually get 40moa elevation if you want. The 30mm rings do come...
Liked On: 23-09-2019, 09:46 PM
There was some puzzlement as to why more hunters were not participating in the normal Saturday shoots on a regular basis.... I've been there to shoot on a casual basis many times, but not for a...
Liked On: 23-09-2019, 05:28 PM
If you can only afford one or two rifles, or none of the mini actions available tickle your fancy, then yes, go right ahead and get a short action 7mm08 and call it done. Why rebarrel a 7.62x39?...
Liked On: 23-09-2019, 09:45 AM