Wingman
Member

2432 Likes

Page 105 of 163 First ... 555919293949596979899100101102103104105106107108109110111112113114115116117118119155 ... Last

• Jump to page:

1. 
   stagstalker liked post by Wingman On thread : Short 6.5s

   19" Creedmoor with 147gr ELDM @2750fps and a 14.5" Grendel with 123gr @ 2450fps both shoot great. The Creedmoor has dropped reds out past 500m no probs

   Liked On: 17-02-2020, 09:03 PM

2. 
   GWH liked post by Wingman On thread : Zastava 7.62x39 Restoration

   Yes that is basically where I ended up. 130636 After loading a few 125gr TMKs and finding a load with 2207 over the chrono I found the case formed to the chamber nicely and all slop at the rear...

   Liked On: 15-02-2020, 08:09 AM

3. 
   GWH liked post by Wingman On thread : Zastava 7.62x39 Restoration

   So the MAB barrel blank I selected is a 25" long 4140 CM 1-10" twist light Sako contour in a .308" bore diameter. The profile was a fraction lighter than the Zastava barrel but I am planning to my...

   Liked On: 15-02-2020, 08:09 AM

4. 
   GWH liked post by Wingman On thread : Zastava 7.62x39 Restoration

   Before I got started on the new 7.62x39 barrel I had a .22 grendel itch I had to scratch.. I had a very short trueflite 1-8" twist .223Rem take off barrel that I wanted to test the .22 Grendel...

   Liked On: 15-02-2020, 08:04 AM

5. 
   Max Headroom liked post by Wingman On thread : Zastava 7.62x39 Restoration

   Yes that is basically where I ended up. 130636 After loading a few 125gr TMKs and finding a load with 2207 over the chrono I found the case formed to the chamber nicely and all slop at the rear...

   Liked On: 14-02-2020, 06:48 PM

6. 
   Russian 22. liked post by Wingman On thread : Zastava 7.62x39 Restoration

   Nah it was propper fuct.. I gave it a good scrub and bore lap but the grooves have receded from the original groove dimension of .311/.310" to .323" :wtfsmilie: so it may have shot 8mm projectiles...

   Liked On: 14-02-2020, 06:38 PM

7. 
   Tommy liked post by Wingman On thread : Zastava 7.62x39 Restoration

   Yes that is basically where I ended up. 130636 After loading a few 125gr TMKs and finding a load with 2207 over the chrono I found the case formed to the chamber nicely and all slop at the rear...

   Liked On: 14-02-2020, 06:35 PM

8. 
   Micky Duck liked post by Wingman On thread : Zastava 7.62x39 Restoration

   Yes that is basically where I ended up. 130636 After loading a few 125gr TMKs and finding a load with 2207 over the chrono I found the case formed to the chamber nicely and all slop at the rear...

   Liked On: 14-02-2020, 06:30 PM

9. 
   Micky Duck liked post by Wingman On thread : Zastava 7.62x39 Restoration

   So the MAB barrel blank I selected is a 25" long 4140 CM 1-10" twist light Sako contour in a .308" bore diameter. The profile was a fraction lighter than the Zastava barrel but I am planning to my...

   Liked On: 14-02-2020, 05:36 PM

10. 
    nor-west liked post by Wingman On thread : Zastava 7.62x39 Restoration

    So the MAB barrel blank I selected is a 25" long 4140 CM 1-10" twist light Sako contour in a .308" bore diameter. The profile was a fraction lighter than the Zastava barrel but I am planning to my...

    Liked On: 14-02-2020, 04:59 PM

11. 
    takbok liked post by Wingman On thread : Zastava 7.62x39 Restoration

    So the MAB barrel blank I selected is a 25" long 4140 CM 1-10" twist light Sako contour in a .308" bore diameter. The profile was a fraction lighter than the Zastava barrel but I am planning to my...

    Liked On: 14-02-2020, 11:45 AM

12. 
    takbok liked post by Wingman On thread : Zastava 7.62x39 Restoration

    Before I got started on the new 7.62x39 barrel I had a .22 grendel itch I had to scratch.. I had a very short trueflite 1-8" twist .223Rem take off barrel that I wanted to test the .22 Grendel...

    Liked On: 14-02-2020, 11:42 AM

13. 
    takbok liked post by Wingman On thread : Zastava 7.62x39 Restoration

    There seems to be a few fans of these M85 Zastavas so I thought Id share this little rebuild. 130541 Technically this one is a Interarms MarkX but its just a Zastava in a prettier stock and...

    Liked On: 14-02-2020, 11:40 AM

14. 
    rupert liked post by Wingman On thread : Zastava 7.62x39 Restoration

    So the MAB barrel blank I selected is a 25" long 4140 CM 1-10" twist light Sako contour in a .308" bore diameter. The profile was a fraction lighter than the Zastava barrel but I am planning to my...

    Liked On: 14-02-2020, 11:09 AM

15. 
    timattalon liked post by Wingman On thread : Zastava 7.62x39 Restoration

    So the MAB barrel blank I selected is a 25" long 4140 CM 1-10" twist light Sako contour in a .308" bore diameter. The profile was a fraction lighter than the Zastava barrel but I am planning to my...

    Liked On: 14-02-2020, 09:55 AM

Page 105 of 163 First ... 555919293949596979899100101102103104105106107108109110111112113114115116117118119155 ... Last

• Jump to page: