I've fitted quite a few for customers. Ken's Sig stock knuckles can be fitted to the std elude stock. 245909 245910 245911 245912
Liked On: Yesterday, 09:27 PM
Good stuff mate, glad you are happy with it. If you find yourself shooting of a bag often give Rob a yell and grab a rider for it. It screws into the accessory port in the bottom of the stock. I...
Liked On: Yesterday, 07:24 PM
Before I even get started on this thread I would like to point out that Micky Duck was totally responsible fore sending me down this rabbit hole. I was quite happy shooting factory loaded .410 ammo...
Liked On: 25-03-2024, 05:35 PM
235537 235538 235539 235540
Liked On: 22-03-2024, 02:06 PM
235537 235538 235539 235540
Liked On: 19-03-2024, 11:17 AM
235537 235538 235539 235540
Liked On: 19-03-2024, 10:53 AM
So I finaly got around to pushing the vintage SBS chamber out to 3" so I can run my full length brass loads in it. I spent a bit of time dialing in various payloads to see what it shot best with. ...
Liked On: 17-03-2024, 02:37 PM
So I finaly got around to pushing the vintage SBS chamber out to 3" so I can run my full length brass loads in it. I spent a bit of time dialing in various payloads to see what it shot best with. ...
Liked On: 17-03-2024, 10:37 AM
So I finaly got around to pushing the vintage SBS chamber out to 3" so I can run my full length brass loads in it. I spent a bit of time dialing in various payloads to see what it shot best with. ...
Liked On: 17-03-2024, 10:19 AM
I've fitted quite a few for customers. Ken's Sig stock knuckles can be fitted to the std elude stock. 245909 245910 245911 245912
Liked On: 15-03-2024, 02:21 PM
235537 235538 235539 235540
Liked On: 28-02-2024, 06:00 PM
Another one finished. Built on a 1908 Enfield No1 mk3*. This one got a lovely oiled short (12.5") walnut stock I have been saving and a few brass accents. Metalwork finished in midnight blue...
Liked On: 28-02-2024, 02:56 PM
Yes spoke with him the other day, problem with that is the usa maker that they are importing from has been showing no stock of the .45acp blanks for 3 years now and no time frame as to when they will...
Liked On: 28-02-2024, 01:18 PM
Currently have no .45 barrel blanks available as my barrel maker has been out of action.
Liked On: 27-02-2024, 08:37 PM
No.. different hole spacing. The detachable short action mag will fit far enough into a superlight action to feed rounds I'd what I was implying
Liked On: 16-02-2024, 10:28 AM