Thanks Mr Duck, Im glad I finally have your approval :thumbsup: Some advice on your .223 barrel.. Start dipping your bullets in super glue and then sand. ;)
Liked On: 23-01-2020, 08:55 PM
Finally tested the new Mach IV barrel with my CZ 527 Varmint on a soft target tonight. A hare at about 85m with the 20gr V-Max @4200fps 128748 128749
Liked On: 23-01-2020, 02:22 PM
Finally tested the new Mach IV barrel with my CZ 527 Varmint on a soft target tonight. A hare at about 85m with the 20gr V-Max @4200fps 128748 128749
Liked On: 23-01-2020, 10:51 AM
Finally tested the new Mach IV barrel with my CZ 527 Varmint on a soft target tonight. A hare at about 85m with the 20gr V-Max @4200fps 128748 128749
Liked On: 23-01-2020, 10:26 AM
Shot the rest of my 90gr ELDX this morning before the wind got up. Respectable groups and good velocity with both powders at 3180fps but the Nosler 90gr still have a slight edge. My 95gr Nosler BTs...
Liked On: 23-01-2020, 09:36 AM
Hi Bryn, All of my best stuff is made in a Kiwi shed.. What twist rate do you recomend for your Targex 95gr?
Liked On: 23-01-2020, 09:28 AM
Finally tested the new Mach IV barrel with my CZ 527 Varmint on a soft target tonight. A hare at about 85m with the 20gr V-Max @4200fps 128748 128749
Liked On: 23-01-2020, 08:05 AM
Mathias that looks great! I figured Id spend a bit of time on this ones stock and tidy it up in general. The metal work is pretty much perfect after a couple of blue touch ups. The stock is a...
Liked On: 22-01-2020, 11:24 PM
I just got back from testing the Zastava on paper. I ended up backing the load off to 25gr from 26.5gr with the 75gr Sierras and seated them to 47.5mm to feed from the internal mag. This dropped...
Liked On: 22-01-2020, 11:21 PM
Mathias that looks great! I figured Id spend a bit of time on this ones stock and tidy it up in general. The metal work is pretty much perfect after a couple of blue touch ups. The stock is a...
Liked On: 22-01-2020, 10:30 PM
Mathias that looks great! I figured Id spend a bit of time on this ones stock and tidy it up in general. The metal work is pretty much perfect after a couple of blue touch ups. The stock is a...
Liked On: 22-01-2020, 09:24 PM
Mathias that looks great! I figured Id spend a bit of time on this ones stock and tidy it up in general. The metal work is pretty much perfect after a couple of blue touch ups. The stock is a...
Liked On: 22-01-2020, 03:33 PM
Mathias that looks great! I figured Id spend a bit of time on this ones stock and tidy it up in general. The metal work is pretty much perfect after a couple of blue touch ups. The stock is a...
Liked On: 22-01-2020, 02:10 PM
I just got back from testing the Zastava on paper. I ended up backing the load off to 25gr from 26.5gr with the 75gr Sierras and seated them to 47.5mm to feed from the internal mag. This dropped...
Liked On: 22-01-2020, 12:13 AM
I just got back from testing the Zastava on paper. I ended up backing the load off to 25gr from 26.5gr with the 75gr Sierras and seated them to 47.5mm to feed from the internal mag. This dropped...
Liked On: 21-01-2020, 08:05 PM