Wingman
Member

2432 Likes

Page 109 of 163 First ... 9599596979899100101102103104105106107108109110111112113114115116117118119120121122123159 ... Last

• Jump to page:

1. 
   Micky Duck liked post by Wingman On thread : 6x45 Rem barrel

   I just got back from testing the Zastava on paper. I ended up backing the load off to 25gr from 26.5gr with the 75gr Sierras and seated them to 47.5mm to feed from the internal mag. This dropped...

   Liked On: 21-01-2020, 07:31 PM

2. 
   Barefoot liked post by Wingman On thread : 6x45 Rem barrel

   I just got back from testing the Zastava on paper. I ended up backing the load off to 25gr from 26.5gr with the 75gr Sierras and seated them to 47.5mm to feed from the internal mag. This dropped...

   Liked On: 21-01-2020, 06:52 PM

3. 
   SixtyTen liked post by Wingman On thread : 6x45 Rem barrel

   I just got back from testing the Zastava on paper. I ended up backing the load off to 25gr from 26.5gr with the 75gr Sierras and seated them to 47.5mm to feed from the internal mag. This dropped...

   Liked On: 21-01-2020, 04:49 PM

4. 
   SixtyTen liked post by Wingman On thread : 6x45 Rem barrel

   I got the action all trued up, barrel threaded both ends and chambered. I polished a few rough edges on the bolt/bolt channel and burnished in some molly powder which made it very slick. 128619...

   Liked On: 21-01-2020, 04:48 PM

5. 
   Bill999 liked post by Wingman On thread : 6x45 Rem barrel

   I just got back from testing the Zastava on paper. I ended up backing the load off to 25gr from 26.5gr with the 75gr Sierras and seated them to 47.5mm to feed from the internal mag. This dropped...

   Liked On: 21-01-2020, 03:47 PM

6. 
   25 /08 IMP liked post by Wingman On thread : 6x45 Rem barrel

   I just got back from testing the Zastava on paper. I ended up backing the load off to 25gr from 26.5gr with the 75gr Sierras and seated them to 47.5mm to feed from the internal mag. This dropped...

   Liked On: 21-01-2020, 03:01 PM

7. 
   Mathias liked post by Wingman On thread : 6x45 Rem barrel

   I ordered a set of Reddings from my buddy in the states but had been using Southerman's set while he is back in Canada. I had thought to make some from a .223 rem set of bushing dies and just run...

   Liked On: 21-01-2020, 02:27 PM

8. 
   Mathias liked post by Wingman On thread : 6x45 Rem barrel

   I just got back from testing the Zastava on paper. I ended up backing the load off to 25gr from 26.5gr with the 75gr Sierras and seated them to 47.5mm to feed from the internal mag. This dropped...

   Liked On: 21-01-2020, 02:27 PM

9. 
   Mathias liked post by Wingman On thread : 6x45 Rem barrel

   Something else to consider is the lower BC of many of the flat base type varmint bullets. They wash of speed much faster than the longer more slippery hunting bullets. I would consider this 6x45 a...

   Liked On: 21-01-2020, 12:47 PM

10. 
    wsm junkie liked post by Wingman On thread : 6x45 Rem barrel

    I got the action all trued up, barrel threaded both ends and chambered. I polished a few rough edges on the bolt/bolt channel and burnished in some molly powder which made it very slick. 128619...

    Liked On: 21-01-2020, 08:51 AM

11. 
    Mathias liked post by Wingman On thread : 6x45 Rem barrel

    I got the action all trued up, barrel threaded both ends and chambered. I polished a few rough edges on the bolt/bolt channel and burnished in some molly powder which made it very slick. 128619...

    Liked On: 21-01-2020, 07:47 AM

12. 
    Steelisreal liked post by Wingman On thread : 6x45 Rem barrel

    I got the action all trued up, barrel threaded both ends and chambered. I polished a few rough edges on the bolt/bolt channel and burnished in some molly powder which made it very slick. 128619...

    Liked On: 20-01-2020, 11:05 PM

13. 
    GWH liked post by Wingman On thread : 6x45 Rem barrel

    I got the action all trued up, barrel threaded both ends and chambered. I polished a few rough edges on the bolt/bolt channel and burnished in some molly powder which made it very slick. 128619...

    Liked On: 20-01-2020, 10:37 PM

14. 
    Micky Duck liked post by Wingman On thread : 6x45 Rem barrel

    Ok so the Zastava pushed inline. I have made a start on the M85 instead of the Sako as my weekend penciled in for workshop and load development time was sidetracked by a sick wife and kids. They...

    Liked On: 20-01-2020, 07:19 PM

15. 
    Tommy liked post by Wingman On thread : 6x45 Rem barrel

    Ok so the Zastava pushed inline. I have made a start on the M85 instead of the Sako as my weekend penciled in for workshop and load development time was sidetracked by a sick wife and kids. They...

    Liked On: 20-01-2020, 06:40 PM

Page 109 of 163 First ... 9599596979899100101102103104105106107108109110111112113114115116117118119120121122123159 ... Last

• Jump to page: