Back into the mill to inlet it for the action, a series of drills and end mills to start with cut out the mag and trigger slots and rear action screw position ...
Liked On: 17-04-2020, 10:10 AM
These fury bastards just dont stop... 135506
Liked On: 17-04-2020, 09:36 AM
Another one of these last night 134872
Liked On: 17-04-2020, 09:34 AM
Will start a new thread shortly rather than highjak this one. One off builds are really not cost/time effective so if I was to sell them Id design a bunch and have them cnc cut for popular models....
Liked On: 17-04-2020, 09:13 AM
Next up was to rebarrel it. The 788 tenon thread is a fairly small 1"x20tpi so there was plenty of meat left in the palma profiled knox once the .308 chamber was trimmed off. Once centred in the...
Liked On: 16-04-2020, 11:09 PM
Zastava .308x39 15.5" barrel 135897 Desert Tech SRS 19" lightweight fluted 6.5 Creedmoor 135899 Zastava 13" .22 Grendel barrel
Liked On: 16-04-2020, 11:08 PM
Yes, .473". I will add to this build thread today and through the next few days between entertaining kids etc.. it will be a lengthy one with a lot of information and pics for like minded...
Liked On: 16-04-2020, 10:59 PM
.30BR Rem 788 Chassis build I put this rifle together some time ago but never did a build thread for it. Lock down has given me a tiny bit of time to do so now so here goes… Over the past 20...
Liked On: 16-04-2020, 10:59 PM
Then it was on to chambering it in the mighty .30BR. For my past builds I used a 7mm Rem BR reamer and finished it with a .308 neck and throat reamer which always ended up with quite a long...
Liked On: 16-04-2020, 10:21 PM
Next up was to rebarrel it. The 788 tenon thread is a fairly small 1"x20tpi so there was plenty of meat left in the palma profiled knox once the .308 chamber was trimmed off. Once centred in the...
Liked On: 16-04-2020, 10:20 PM
I have the reamer for the .22BR too but have never built one. I hovered over it for a while while considering a .224 barrel on my desert tech but ended up going with a .22x47 Lapua AI instead. The...
Liked On: 16-04-2020, 10:09 PM
Then it was on to chambering it in the mighty .30BR. For my past builds I used a 7mm Rem BR reamer and finished it with a .308 neck and throat reamer which always ended up with quite a long...
Liked On: 16-04-2020, 08:35 PM
I was also handed a Krieger 1-13" twist .308 win 30" Palma match barrel to use on the donor action. I stripped the rifle down removing the barrel and the trigger (which was in for some serious...
Liked On: 16-04-2020, 06:31 PM
Next up was to rebarrel it. The 788 tenon thread is a fairly small 1"x20tpi so there was plenty of meat left in the palma profiled knox once the .308 chamber was trimmed off. Once centred in the...
Liked On: 16-04-2020, 06:08 PM
I was also handed a Krieger 1-13" twist .308 win 30" Palma match barrel to use on the donor action. I stripped the rifle down removing the barrel and the trigger (which was in for some serious...
Liked On: 16-04-2020, 06:07 PM