Xomphec
Member

7 Likes

1. 
   Xomphec liked post by Nakihunter On thread : New to reloading - need to Check my thinking

   Since you asked for advice, let me explain what I started with. I used to read gun magazines from the mid 1970s and got my license when I came to NZ in the early 90s. The best advice I picked up...

   Liked On: 22-01-2024, 04:38 PM

2. 
   Xomphec liked post by Rated M for Magnum On thread : New to reloading - need to Check my thinking

   That's a good start point, nice and low. See how you go, 2208 goes really well in 243.

   Liked On: 20-01-2024, 09:11 PM

3. 
   Xomphec liked post by Jaco Goosen On thread : New to reloading - need to Check my thinking

   I've been taught if you've got a projectile thats not listed you just pick the next heavier projectile of the same type and use its load data. If your confident, you can go past the the heavier...

   Liked On: 20-01-2024, 09:11 PM

4. 
   Xomphec liked post by blip On thread : New to reloading - need to Check my thinking

   I dont get too hung up on the particular projectile they mention other than if there's a choice between a traditional cup and core vs a solid copper pill. In your case Id just go with cup and core if...

   Liked On: 20-01-2024, 03:35 PM

5. 
   Xomphec liked post by Micky Duck On thread : New to reloading - need to Check my thinking

   once upon a time no manuals had different projectiles listed..just the weight..BECAUSE reloaders would start at low end and work thier way up till got nice accurate load..then be happy and go...

   Liked On: 20-01-2024, 03:35 PM

6. 
   Xomphec liked post by Rushy On thread : Another New guy on the block

   Welcome aboard. Get out there now. The yearlings have just been kicked out of home by mum and are having to find their way by themselves

   Liked On: 21-12-2023, 05:46 PM

7. 
   Xomphec liked post by Shearer On thread : Another New guy on the block

   Welcome to the forum. Lots of good members around Nelson. Expect to get the deep end of the flounder net first up though.

   Liked On: 21-12-2023, 05:46 PM