zimmer
Member

2535 Likes

Page 95 of 169 First ... 4581828384858687888990919293949596979899100101102103104105106107108109145 ... Last

• Jump to page:

1. 
   outlander liked post by zimmer On thread : Has our ability to buy loose lead shot ceased?

   There's quite a few around like that and then there's outfits like Reloaders (no, I don't work for them). Their website accurately reflects what they have. The worst I have found is a place in...

   Liked On: 22-01-2021, 12:50 PM

2. 
   csmiffy liked post by zimmer On thread : Anyone in Chch got a 1/2" lapping bar I could borrow?

   Still screwed up.... 25.4mm :P

   Liked On: 21-01-2021, 06:33 PM

3. 
   Finnwolf liked post by zimmer On thread : Recent US export rule changes

   In the early days of YouShop I sent dies, scope sights via them. Then they went PC and stopped that. I ceased using them for anything at all about 6 years ago when they stopped my parcel which...

   Liked On: 20-01-2021, 11:10 AM

4. 
   Mauser308 liked post by zimmer On thread : New to reloading - to what fraction of a grain do you test new loads? 0.5gr, 0.3gr...

   There is no one answer. Figure on roughly 10% steps of the nominal load. So yes, catridge capacity dependant. 0.5 gr for say 308 sized, for a 22 Hornet 0.2 gr dropping to 0.1 gr when approaching...

   Liked On: 19-01-2021, 10:26 PM

5. 
   40mm liked post by zimmer On thread : Expected price for an antique shotgun

   Have a yarn with Greg Carvell @ SAI.

   Liked On: 19-01-2021, 09:42 PM

6. 
   caberslash liked post by zimmer On thread : New to reloading - to what fraction of a grain do you test new loads? 0.5gr, 0.3gr...

   There is no one answer. Figure on roughly 10% steps of the nominal load. So yes, catridge capacity dependant. 0.5 gr for say 308 sized, for a 22 Hornet 0.2 gr dropping to 0.1 gr when approaching...

   Liked On: 19-01-2021, 08:32 PM

7. 
   Micky Duck liked post by zimmer On thread : New to reloading - to what fraction of a grain do you test new loads? 0.5gr, 0.3gr...

   There is no one answer. Figure on roughly 10% steps of the nominal load. So yes, catridge capacity dependant. 0.5 gr for say 308 sized, for a 22 Hornet 0.2 gr dropping to 0.1 gr when approaching...

   Liked On: 19-01-2021, 08:22 PM

8. 
   Pav liked post by zimmer On thread : New to reloading - to what fraction of a grain do you test new loads? 0.5gr, 0.3gr...

   There is no one answer. Figure on roughly 10% steps of the nominal load. So yes, catridge capacity dependant. 0.5 gr for say 308 sized, for a 22 Hornet 0.2 gr dropping to 0.1 gr when approaching...

   Liked On: 19-01-2021, 08:02 PM

9. 
   6x47 liked post by zimmer On thread : Reloading press

   I have a JR3. Nice press but not grunty like the compound linkage models. Longest ammo I have reloaded was 7x57. No trouble full length sizing 284W. Gap between top of shellholder and the...

   Liked On: 19-01-2021, 07:34 AM

10. 
    takbok liked post by zimmer On thread : Does gunshot clear a area in the bush

    Many years ago I had another hunter take a shot at me. The shot smacked into the papa bank just in front of me. We were in shitty manuka at the time. I immediately fired a shot into the air. A...

    Liked On: 18-01-2021, 05:09 AM

11. 
    Jhon liked post by zimmer On thread : 7x57mm 1st effort - comments?

    Bloody fingers, my drop tube is 550 mm long not 40mm. The ones in the funnel set are too short. Made mine out of a length of copper tube. W296 is a bastard, it jammed up the rotating tube on my...

    Liked On: 18-01-2021, 02:52 AM

12. 
    Boaraxa liked post by zimmer On thread : Does gunshot clear a area in the bush

    Many years ago I had another hunter take a shot at me. The shot smacked into the papa bank just in front of me. We were in shitty manuka at the time. I immediately fired a shot into the air. A...

    Liked On: 17-01-2021, 11:42 PM

13. 
    shooternz liked post by zimmer On thread : Reloading press

    I have a JR3. Nice press but not grunty like the compound linkage models. Longest ammo I have reloaded was 7x57. No trouble full length sizing 284W. Gap between top of shellholder and the...

    Liked On: 17-01-2021, 01:52 PM

14. 
    Tech liked post by zimmer On thread : Reloading press

    I have a JR3. Nice press but not grunty like the compound linkage models. Longest ammo I have reloaded was 7x57. No trouble full length sizing 284W. Gap between top of shellholder and the...

    Liked On: 16-01-2021, 11:22 PM

15. 
    csmiffy liked post by zimmer On thread : Reloading press

    I have a JR3. Nice press but not grunty like the compound linkage models. Longest ammo I have reloaded was 7x57. No trouble full length sizing 284W. Gap between top of shellholder and the...

    Liked On: 16-01-2021, 08:29 PM

Page 95 of 169 First ... 4581828384858687888990919293949596979899100101102103104105106107108109145 ... Last

• Jump to page: